Hi, This series is v2 of the series to introduce the ti-cpufreq driver which parses SoC data and provides opp-supported-hw data to the OPP core in order to enable the proper OPPs for the silicon in use. v1 of this series can be found here [1]. Mostly minor fixes to the driver with the largest being converting to the driver to a module_platform_driver. In addition to this, the binding was updated to add TI specific compatible strings for the SoCs supported by the driver that it matches now. More specific driver changes can be found in the patches. This patch depends on [2], which actually has already been merged even though the binding was not finalized yet, so another series here [3] was sent to update the already merged dt nodes. Regards, Dave [1] https://lkml.org/lkml/2016/5/18/653 [2] http://lists.infradead.org/pipermail/linux-arm-kernel/2016-May/430205.html [3] http://lists.infradead.org/pipermail/linux-arm-kernel/2016-August/452981.html Dave Gerlach (2): Documentation: dt: add bindings for ti-cpufreq cpufreq: ti: Add cpufreq driver to determine available OPPs at runtime .../devicetree/bindings/cpufreq/ti-cpufreq.txt | 130 +++++++++ drivers/cpufreq/Kconfig.arm | 11 + drivers/cpufreq/Makefile | 1 + drivers/cpufreq/ti-cpufreq.c | 308 +++++++++++++++++++++ 4 files changed, 450 insertions(+) create mode 100644 Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt create mode 100644 drivers/cpufreq/ti-cpufreq.c -- 2.9.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
