On Thu, Sep 1, 2016 at 3:30 AM, <jorik@xxxxxxxxxxxxxx> wrote:
> From: Jorik Jonker <jorik@xxxxxxxxxxxxxx>
>
> This adds proper pinmux definitions for i2c0 and i2c1. Although H3 has a third
> i2c controller, these are not exposed on my boards. If someone actually has a
> H3 board with an exposed i2c2, they could add the third.
>
> Signed-off-by: Jorik Jonker <jorik@xxxxxxxxxxxxxx>
> ---
> arch/arm/boot/dts/sun8i-h3.dtsi | 14 ++++++++++++++
> 1 file changed, 14 insertions(+)
>
> diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
> index 7740748..0637b95 100644
> --- a/arch/arm/boot/dts/sun8i-h3.dtsi
> +++ b/arch/arm/boot/dts/sun8i-h3.dtsi
> @@ -327,6 +327,20 @@
> interrupt-controller;
> #interrupt-cells = <3>;
>
> + i2c0_pins_a: i2c0@0 {
> + allwinner,pins = "PA11", "PA12";
> + allwinner,function = "i2c0";
> + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> + };
> +
> + i2c1_pins_a: i2c1@0 {
These pinmuxes are the only ones possible for each peripheral.
Please drop the _a suffix and the @0 address for both of them.
ChenYu
> + allwinner,pins = "PA18", "PA19";
> + allwinner,function = "i2c1";
> + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> + };
> +
> mmc0_pins_a: mmc0@0 {
> allwinner,pins = "PF0", "PF1", "PF2", "PF3",
> "PF4", "PF5";
> --
> 2.7.4
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
