From: Jorik Jonker <jorik@xxxxxxxxxxxxxx> This is v2 of my patch series. Just after sending I noticed the interrupts of i2c1 were too liberally copy/paste'd. This is fixed in v2. This series is a follow-up to Martin Ayotte's efforts to add additional UARTS and I2C ports to the AllWinner H3 SoC DTS files. In this series I explicitly leave out i2c2, since this is not broken out on my boards, so I cannot verify if it actually works. After the patch, one enables for example uart1 on a opi+ like this from u-boot: => fdt set /soc/serial@01c28400 status okay Regards, Jorik Jorik Jonker (7): dts: sun8i-h3: add pinmux definitions for uart2/uart3 dts: sun8i-h3: add pinmux definitions for i2c0/i2c1 dts: sun8i-h3: add i2c0/i2c1 SoC peripherals dts: sun8i-h3: add UART1-3 to Orange Pi Plus dts: sun8i-h3: add UART1-3 to Orange Pi PC dts: sun8i-h3: add I2C0-1 to Orange Pi Plus dts: sun8i-h3: add I2C0-1 to Orange Pi PC arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts | 25 ++++++++++++++ arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts | 25 ++++++++++++++ arch/arm/boot/dts/sun8i-h3.dtsi | 50 ++++++++++++++++++++++++++++ 3 files changed, 100 insertions(+) -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
