Hi Stephen,
On 8/26/2016 3:57 AM, Stephen Boyd wrote:
On 08/24, Ritesh Harjani wrote:
This adds support for sdhc-msm controllers to get supported
clk-rates from DT. sdhci-msm would need it's own set_clock
ops to be implemented. For this, supported clk-rates needs
to be populated in sdhci_msm_pltfm_data.
Signed-off-by: Ritesh Harjani <riteshh@xxxxxxxxxxxxxx>
---
Please include the DT binding review list in binding updates.
.../devicetree/bindings/mmc/sdhci-msm.txt | 1 +
drivers/mmc/host/sdhci-msm.c | 60 ++++++++++++++++++++++
2 files changed, 61 insertions(+)
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.txt b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt
index 485483a..6a83b38 100644
--- a/Documentation/devicetree/bindings/mmc/sdhci-msm.txt
+++ b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt
@@ -17,6 +17,7 @@ Required properties:
"iface" - Main peripheral bus clock (PCLK/HCLK - AHB Bus clock) (required)
"core" - SDC MMC clock (MCLK) (required)
"bus" - SDCC bus voter clock (optional)
+- clk-rates: Array of supported GCC clock frequencies for sdhc, Units - Hz.
Why not use OPPv2 binding for this? We already have a way to
express frequencies for devices with that binding, and we'll need
to attach voltages to those frequencies at some point in the
future if we want to handle DVFS on these devices.
OPPv2 may not work out in this case. This was also discussed at [1].
These clk-rates are not as per voltage points(or any OPP) but as per bus
speed mode request from higher layer.
[1] - https://patchwork.kernel.org/patch/9204879/
Thanks
Ritesh
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html