On 08/28/2016 01:21 PM, Randy Li wrote:
> Enable the WM8960 analog audio codec on TOPEET iTop 4412 Elite board.
>
> Signed-off-by: Randy Li <ayaka@xxxxxxxxxxx>
> ---
> arch/arm/boot/dts/exynos4412-itop-elite.dts | 77 +++++++++++++++++++++++++++++
> 1 file changed, 77 insertions(+)
>
> diff --git a/arch/arm/boot/dts/exynos4412-itop-elite.dts b/arch/arm/boot/dts/exynos4412-itop-elite.dts
> index 2d11b9a..e1cda54 100644
> --- a/arch/arm/boot/dts/exynos4412-itop-elite.dts
> +++ b/arch/arm/boot/dts/exynos4412-itop-elite.dts
> @@ -15,6 +15,7 @@
>
> /dts-v1/;
> #include "exynos4412-itop-scp-core.dtsi"
> +#include <dt-bindings/sound/samsung-i2s.h>
Reverse the includes and squash the patch with #2.
Best regards,
Krzysztof
>
> / {
> model = "TOPEET iTop 4412 Elite board based on Exynos4412";
> @@ -75,6 +76,54 @@
> gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
> };
> };
> +
> + sound {
> + compatible = "simple-audio-card";
> + simple-audio-card,name = "wm-sound";
> +
> + assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>,
> + <&clock_audss EXYNOS_MOUT_I2S>,
> + <&clock_audss EXYNOS_DOUT_SRP>,
> + <&clock_audss EXYNOS_DOUT_AUD_BUS>;
> + assigned-clock-parents = <&clock CLK_FOUT_EPLL>,
> + <&clock_audss EXYNOS_MOUT_AUDSS>;
> + assigned-clock-rates = <0>,
> + <0>,
> + <112896000>,
> + <11289600>;
> +
> + simple-audio-card,format = "i2s";
> + simple-audio-card,bitclock-master = <&link0_codec>;
> + simple-audio-card,frame-master = <&link0_codec>;
> +
> + simple-audio-card,widgets =
> + "Microphone", "Mic Jack",
> + "Line", "Line In",
> + "Line", "Line Out",
> + "Speaker", "Speaker",
> + "Headphone", "Headphone Jack";
> + simple-audio-card,routing =
> + "Headphone Jack", "HP_L",
> + "Headphone Jack", "HP_R",
> + "Speaker", "SPK_LP",
> + "Speaker", "SPK_LN",
> + "Speaker", "SPK_RP",
> + "Speaker", "SPK_RN",
> + "LINPUT1", "Mic Jack",
> + "LINPUT3", "Mic Jack",
> + "RINPUT1", "Mic Jack",
> + "RINPUT2", "Mic Jack";
> +
> + simple-audio-card,cpu {
> + sound-dai = <&i2s0 0>;
> + };
> +
> + link0_codec: simple-audio-card,codec {
> + sound-dai = <&codec>;
> + clocks = <&i2s0 CLK_I2S_CDCLK>;
> + system-clock-frequency = <11289600>;
> + };
> + };
>
> beep {
> compatible = "pwm-beeper";
> @@ -143,6 +192,34 @@
> status = "okay";
> };
>
> +&i2c_4 {
> + samsung,i2c-sda-delay = <100>;
> + samsung,i2c-slave-addr = <0x10>;
> + samsung,i2c-max-bus-freq = <100000>;
> + pinctrl-0 = <&i2c4_bus>;
> + pinctrl-names = "default";
> + status = "okay";
> +
> + codec: wm8960@1a {
> + compatible = "wlf,wm8960";
> + reg = <0x1a>;
> + clocks = <&pmu_system_controller 0>;
> + clock-names = "MCLK1";
> + wlf,shared-lrclk;
> + #sound-dai-cells = <0>;
> + };
> +};
> +
> +&i2s0 {
> + pinctrl-0 = <&i2s0_bus>;
> + pinctrl-names = "default";
> + status = "okay";
> + clocks = <&clock_audss EXYNOS_I2S_BUS>,
> + <&clock_audss EXYNOS_DOUT_AUD_BUS>,
> + <&clock_audss EXYNOS_SCLK_I2S>;
> + clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
> +};
> +
> &pwm {
> pinctrl-0 = <&pwm1_out>;
> pinctrl-names = "default";
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
