Re: [PATCH 3/4] ARM: dts: add fimc support in exynos4412 TOPEET iTop Elite board

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 08/28/2016 01:21 PM, Randy Li wrote:
> The is not used for camera, I enabled it just for a colorspace
> convertor.
> 
> Signed-off-by: Randy Li <ayaka@xxxxxxxxxxx>
> ---
>  arch/arm/boot/dts/exynos4412-itop-elite.dts | 16 ++++++++++++++++

This should be squashed with patch #2.

BTW, please add also vendor prefix
(Documentation/devicetree/bindings/vendor-prefixes.txt).

Best regards,
Krzysztof

>  1 file changed, 16 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/exynos4412-itop-elite.dts b/arch/arm/boot/dts/exynos4412-itop-elite.dts
> index 5688589..2d11b9a 100644
> --- a/arch/arm/boot/dts/exynos4412-itop-elite.dts
> +++ b/arch/arm/boot/dts/exynos4412-itop-elite.dts
> @@ -82,6 +82,14 @@
>  		pinctrl-0 = <&pwm0_out>;
>  		pinctrl-names = "default";
>  	};
> +
> +	camera: camera {
> +		pinctrl-0 = <&cam_port_a_clk_active>;
> +		pinctrl-names = "default";
> +		status = "okay";
> +		assigned-clocks = <&clock CLK_MOUT_CAM0>;
> +		assigned-clock-parents = <&clock CLK_XUSBXTI>;
> +	};
>  };
>  
>  &pinctrl_1 {
> @@ -146,3 +154,11 @@
>  	vdd-supply = <&ldo3_reg>;
>  	status = "okay";
>  };
> +
> +&fimc_0 {
> +	status = "okay";
> +	assigned-clocks = <&clock CLK_MOUT_FIMC0>,
> +			<&clock CLK_SCLK_FIMC0>;
> +	assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
> +	assigned-clock-rates = <0>, <176000000>;
> +};
> 

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux