- Renames the DT binding document to common for ARM and MIPS based SoCs
- Adds a compatible string "brcm,bcm7445-sdhci" that is representation
for the Broadcom BCM7445 and family. It is initial and typical 28nm
generation ARM based SoC.
Signed-off-by: Jaedon Shin <jaedon.shin@xxxxxxxxx>
---
.../mmc/{brcm,bcm7425-sdhci.txt => brcm,sdhci-brcmstb.txt} | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
rename Documentation/devicetree/bindings/mmc/{brcm,bcm7425-sdhci.txt => brcm,sdhci-brcmstb.txt} (81%)
diff --git a/Documentation/devicetree/bindings/mmc/brcm,bcm7425-sdhci.txt b/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.txt
similarity index 81%
rename from Documentation/devicetree/bindings/mmc/brcm,bcm7425-sdhci.txt
rename to Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.txt
index 82847174c37d..555229367935 100644
--- a/Documentation/devicetree/bindings/mmc/brcm,bcm7425-sdhci.txt
+++ b/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.txt
@@ -8,14 +8,16 @@ on Device Tree properties to enable them for SoC/Board combinations
that support them.
Required properties:
-- compatible: "brcm,bcm7425-sdhci"
+- compatible: should be one of the following
+ - "brcm,bcm7425-sdhci"
+ - "brcm,bcm7445-sdhci"
Refer to clocks/clock-bindings.txt for generic clock consumer properties.
Example:
sdhci@f03e0100 {
- compatible = "brcm,bcm7425-sdhci";
+ compatible = "brcm,bcm7445-sdhci";
reg = <0xf03e0000 0x100>;
interrupts = <0x0 0x26 0x0>;
sdhci,auto-cmd12;
@@ -27,7 +29,7 @@ Example:
sdhci@f03e0300 {
non-removable;
bus-width = <0x8>;
- compatible = "brcm,bcm7425-sdhci";
+ compatible = "brcm,bcm7445-sdhci";
reg = <0xf03e0200 0x100>;
interrupts = <0x0 0x27 0x0>;
sdhci,auto-cmd12;
--
2.9.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
