On Fri, Nov 29, 2013 at 10:29:03PM +0100, Arnaud Ebalard wrote: > > All hardware parts of the (mv78230 Armada XP based) NETGEAR ReadyNAS > 2120 are supported by mainline kernel (USB 3.0 and eSATA rear ports, > USB 2.0 front port, Gigabit controller and PHYs for the two rear ports, > serial port, LEDs, Buttons, 88SE9170 SATA controllers, three G762 fan > controllers, G751 temperature sensor) except for: > > - the Intersil ISL12057 I2C RTC Chip, > - the Armada NAND controller. > > Support for both of those is currently work in progress and does not > prevent boot. > > Signed-off-by: Arnaud Ebalard <arno@xxxxxxxxxxxx> > --- ... > > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/armada-xp-netgear-rn2120.dts | 286 +++++++++++++++++++++++++ > 2 files changed, 287 insertions(+) > create mode 100644 arch/arm/boot/dts/armada-xp-netgear-rn2120.dts Applied to mvebu/dt thx, Jason. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html