Re: [PATCH v2 3/6] dt/bindings: Add bindings for Tegra GMI controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




2016-08-24 21:54 GMT+02:00 Mirza Krak <mirza.krak@xxxxxxxxx>:
> 2016-08-24 17:56 GMT+02:00 Jon Hunter <jonathanh@xxxxxxxxxx>:
> +
>>> +Example with two SJA1000 CAN controllers connected to the GMI bus. We wrap the
>>> +controllers with a simple-bus node since they are all connected to the same
>>> +chip-select (CS4), in this example external address decoding is provided:
>>> +
>>> +gmi@70090000 {
>>> +     compatible = "nvidia,tegra20-gmi";
>>> +     reg = <0x70009000 0x1000>;
>>> +     #address-cells = <1>;
>>> +     #size-cells = <1>;
>>> +     clocks = <&tegra_car TEGRA20_CLK_NOR>;
>>> +     clock-names = "gmi";
>>> +     resets = <&tegra_car 42>;
>>> +     reset-names = "gmi";
>>> +     ranges = <4 0x48000000 0x7ffffff>;
>>> +
>>> +     status = "disabled";
>>> +
>>> +     bus@4 {
>>> +             compatible = "simple-bus";
>>> +             reg = <4>;
>>> +             #address-cells = <1>;
>>> +             #size-cells = <1>;
>>> +             ranges = <0 4 0x40100>;
>>
>> Does this work? I tried to add an example like this and I got ...
>>
>> Warning (reg_format): "reg" property in /gmi@70009000/bus@4 has invalid
>> length (4 bytes) (#address-cells == 1, #size-cells == 1)
>
> Shoot, to get rid of the warning it should be
>
> reg = <4 0 >;
>
> But it works either way.
>
>>
>> I am wondering if we should just following the arm,pl172 example and
>> have ...
>>
>>         cs4 {
>>                 compatible = "simple-bus";
>>                 #address-cells = <1>;
>>                 #size-cells = <1>;
>>                 ranges;
>>
>>                 nvidia,snor-cs = <4>;
>>                 nvidia,snor-mux-mode;
>>                 nvidia,snor-adv-inv;
>>
>>                 can@0 {
>>                         reg = <0 0x100>;
>>                         ...
>>                 };
>>
>>                 ...
>>         };
>>
>
> That means to go back to V1 really (almost :)). Which I do not mind.
> Will give it a test run.
>
> But I am a little hesitant if will be any better/cleaner. In your example above:
>
> can@0 {
>          reg = <0 0x100>;
>          ...
> };
>
> Would this really translate correctly? In the pl172 example they have
> multiple ranges and address with "flash@0,0" which a range defined in
> parent node. "can@0" does not have valid match in parent node in our
> example. So I probably need add some more logic for it to properly
> translate.
>
> I have an idea which is following:
>
> gmi@70090000 {
>          status = "okay";
>          #address-cells = <2>;
>          #size-cells = <1>;
>          ranges = <4 0 0x48000000 0x00040000>;
>
>          cs4 {
>                  compatible = "simple-bus";
>                  #address-cells = <2>;
>                  #size-cells = <1>;
>                  ranges;
>
>                  nvidia,snor-cs = <4>;
>                  nvidia,snor-mux-mode;
>                  nvidia,snor-adv-inv;
>
>                  can@0 {
>                          compatible = "nxp,sja1000";
>                          reg = <4 0 0x100>;
>                          ...
>                  };
>
>
>                  can@40000 {
>                          compatible = "nxp,sja1000";
>                          reg = <4 0x40000 0x100>;
>                          ...
>                  };
>          };
> };
>
> Do not know if above will work at all (not able to test at current
> location), anyway I will play around with it some more and get back to
> you.

Gave above a test run and it works like a charm. Are we happy with that?

Best Regards
Mirza
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux