The sdhci controller on xilinx zynq devices will not function unless the cd bit is provided. http://www.xilinx.com/support/answers/61064.html In cases where it is impossible to provide the cd bit in hardware, setting the controller to test mode and then setting inserted to true will get the controller to function with out the cd bit. The device property "fake-cd" will let the arasan driver know it needs to fake the cd bit for the controller inorder for the controller to function with a SD card that does not provide the CD bit. Signed-off-by: Zach Brown <zach.brown@xxxxxx> --- Documentation/devicetree/bindings/mmc/arasan,sdhci.txt | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt b/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt index 3404afa..3b9f406 100644 --- a/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt +++ b/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt @@ -21,6 +21,10 @@ Required Properties: - interrupts: Interrupt specifier - interrupt-parent: Phandle for the interrupt controller that services interrupts for this device. +Optional Properties: +- fake-cd: On Zynq Devices the SDHCI Controller will not work without the cd + bit. When this option is set the driver will put the controller in test mode + and fake the cd bit so it will function. Required Properties for "arasan,sdhci-5.1": - phys: From PHY bindings: Phandle for the Generic PHY for arasan. -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
