The sdhci controller on xilinx zynq devices will not function unless the cd bit is provided. http://www.xilinx.com/support/answers/61064.html In cases where it is impossible to provide the cd bit in hardware, setting the controller to test mode and then setting inserted to true will get the controller to function with out the cd bit. The device property "fake-cd" will let the arasan driver know it needs to fake the cd bit for the controller inorder for the controller to function with a SD card that does not provide the CD bit. Signed-off-by: Zach Brown <zach.brown@xxxxxx> --- drivers/mmc/host/sdhci-of-arasan.c | 23 ++++++++++++++++++++++- drivers/mmc/host/sdhci.h | 4 ++++ 2 files changed, 26 insertions(+), 1 deletion(-) diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c index e0f193f..a74bcf5 100644 --- a/drivers/mmc/host/sdhci-of-arasan.c +++ b/drivers/mmc/host/sdhci-of-arasan.c @@ -26,6 +26,7 @@ #include <linux/phy/phy.h> #include <linux/regmap.h> #include "sdhci-pltfm.h" +#include <linux/of.h> #define SDHCI_ARASAN_CLK_CTRL_OFFSET 0x2c #define SDHCI_ARASAN_VENDOR_REGISTER 0x78 @@ -203,12 +204,26 @@ static void sdhci_arasan_hs400_enhanced_strobe(struct mmc_host *mmc, writel(vendor, host->ioaddr + SDHCI_ARASAN_VENDOR_REGISTER); } +void sdhci_arasan_reset(struct sdhci_host *host, u8 mask) +{ + u8 ctrl; + + sdhci_reset(host, mask); + + if (host->quirks2 & SDHCI_QUIRK2_NEED_FAKE_CD) { + ctrl = sdhci_readl(host, SDHCI_HOST_CONTROL); + ctrl |= SDHCI_CTRL_CD_TEST_INSERTED | + SDHCI_CTRL_CD_TEST_ENABLE; + sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL); + } +} + static struct sdhci_ops sdhci_arasan_ops = { .set_clock = sdhci_arasan_set_clock, .get_max_clock = sdhci_pltfm_clk_get_max_clock, .get_timeout_clock = sdhci_arasan_get_timeout_clock, .set_bus_width = sdhci_set_bus_width, - .reset = sdhci_reset, + .reset = sdhci_arasan_reset, .set_uhs_signaling = sdhci_set_uhs_signaling, }; @@ -516,6 +531,12 @@ static int sdhci_arasan_probe(struct platform_device *pdev) } sdhci_get_of_property(pdev); + + if (of_get_property(pdev->dev.of_node, "fake-cd", NULL)) + host->quirks2 |= SDHCI_QUIRK2_NEED_FAKE_CD; + + pltfm_host = sdhci_priv(host); + pltfm_host->priv = sdhci_arasan; pltfm_host->clk = clk_xin; sdhci_arasan_update_baseclkfreq(host); diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h index 0411c9f..ff3c8ba 100644 --- a/drivers/mmc/host/sdhci.h +++ b/drivers/mmc/host/sdhci.h @@ -84,6 +84,8 @@ #define SDHCI_CTRL_ADMA32 0x10 #define SDHCI_CTRL_ADMA64 0x18 #define SDHCI_CTRL_8BITBUS 0x20 +#define SDHCI_CTRL_CD_TEST_INSERTED 0x40 +#define SDHCI_CTRL_CD_TEST_ENABLE 0x80 #define SDHCI_POWER_CONTROL 0x29 #define SDHCI_POWER_ON 0x01 @@ -422,6 +424,8 @@ struct sdhci_host { #define SDHCI_QUIRK2_ACMD23_BROKEN (1<<14) /* Broken Clock divider zero in controller */ #define SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN (1<<15) +/* Controller needs the cd bit faked */ +#define SDHCI_QUIRK2_NEED_FAKE_CD (1<<16) int irq; /* Device IRQ */ void __iomem *ioaddr; /* Mapped address */ -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html