Hello.
On 8/22/2016 10:41 AM, Simon Horman wrote:
Define the Blanche board dependent part of the DU device node.
Add the device nodes for the Analog Devices ADV7511W HDMI transmitter
(connected to DU0) and ADV7123 video DAC (connected to DU1). Add the
necessary subnodes to interconnect DU, HDMI/VDAC devices, and HDMI/VGA
connectors.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
---
This patch is against the 'renesas-devel-20160817-v4.8-rc2' of Simon Horman's
'renesas.git' repo plus the general purpose switches patch and the SDHI0 patch
posted earlier.
arch/arm/boot/dts/r8a7792-blanche.dts | 125 ++++++++++++++++++++++++++++++++++
1 file changed, 125 insertions(+)
Index: renesas/arch/arm/boot/dts/r8a7792-blanche.dts
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7792-blanche.dts
+++ renesas/arch/arm/boot/dts/r8a7792-blanche.dts
...
@@ -186,3 +251,63 @@
cd-gpios = <&gpio11 11 GPIO_ACTIVE_LOW>;
status = "okay";
};
+
+&i2c1 {
+ status = "okay";
+ clock-frequency = <400000>;
Is it intentional that there are no pinctrl properties here?
Yes, as I commented in r8a7792.dtsi, all I2C pins are not multiplexed.
MBR, Sergei
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html