Hi Sergei, On Fri, Aug 19, 2016 at 11:42:54PM +0300, Sergei Shtylyov wrote: > Define the Blanche board dependent part of the DU device node. > Add the device nodes for the Analog Devices ADV7511W HDMI transmitter > (connected to DU0) and ADV7123 video DAC (connected to DU1). Add the > necessary subnodes to interconnect DU, HDMI/VDAC devices, and HDMI/VGA > connectors. > > Signed-off-by: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx> > > --- > This patch is against the 'renesas-devel-20160817-v4.8-rc2' of Simon Horman's > 'renesas.git' repo plus the general purpose switches patch and the SDHI0 patch > posted earlier. > > arch/arm/boot/dts/r8a7792-blanche.dts | 125 ++++++++++++++++++++++++++++++++++ > 1 file changed, 125 insertions(+) > > Index: renesas/arch/arm/boot/dts/r8a7792-blanche.dts > =================================================================== > --- renesas.orig/arch/arm/boot/dts/r8a7792-blanche.dts > +++ renesas/arch/arm/boot/dts/r8a7792-blanche.dts ... > @@ -186,3 +251,63 @@ > cd-gpios = <&gpio11 11 GPIO_ACTIVE_LOW>; > status = "okay"; > }; > + > +&i2c1 { > + status = "okay"; > + clock-frequency = <400000>; Is it intentional that there are no pinctrl properties here? ... -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html