Stefan Wahren <stefan.wahren@xxxxxxxx> writes: > Hi Eric, > >> Eric Anholt <eric@xxxxxxxxxx> hat am 18. August 2016 um 20:14 geschrieben: >> >> >> Stefan Wahren <stefan.wahren@xxxxxxxx> writes: >> >> > This patch series is only a draft and not intended to be merged. Patches 1 >> > and 2 >> > aren't bcm2835 specific and should be helpful for other platforms. >> > The patches 2 - 4 are required for otg / gadget mode. The last patch >> > based on the work of Lubomir Rintel [1] and Noralf Trønnes [2]. >> > >> > Changes since V1: >> > - rebase to current linux-next >> > - add patches 1 - 4 for otg/gadget support >> > - add patch 5 with model compatible >> > - use polarity define for ACT LED >> > >> > [1] - >> > http://lists.infradead.org/pipermail/linux-rpi-kernel/2016-February/003221.html >> > [2] - https://github.com/raspberrypi/linux/pull/1239/ >> > >> > Stefan Wahren (6): >> > usb: dwc2: core: Avoid nonsense error in gadget mode >> > usb: dwc2: Add DT properties to specify fifo size in host/otg mode >> > ARM: dts: bcm283x: Add missing usb clock >> > ARM: dts: bcm283x: Add generic USB PHY >> > DT: bindings: bcm: Add Raspberry Pi Zero >> > ARM: dts: bcm2835: Add Raspberry Pi Zero >> >> Where are we at on these? > > I would like to split the series: > part 1: Raspberry Pi Zero support (only USB host mode support) > part 2: OTG / Peripheral support for BCM2835 (hope that i reach the point) That sounds great. >> I've been holding off waiting for the USB >> bits to get settled. I can grab the bindings patch, but is there >> anything else we could merge while you're working on USB? > > Maybe i missed something, but i didn't received any ACK from you about this > series. > > In case everything is okay, you could also merge patch 3 since it's relevant to > bcm283x and not RPi Zero specific. Didn't miss anything. I hadn't acked yet since it looked like there were open questions for the USB folks.
Attachment:
signature.asc
Description: PGP signature
