Stefan Wahren <stefan.wahren@xxxxxxxx> writes: > This patch series is only a draft and not intended to be merged. Patches 1 and 2 > aren't bcm2835 specific and should be helpful for other platforms. > The patches 2 - 4 are required for otg / gadget mode. The last patch > based on the work of Lubomir Rintel [1] and Noralf Trønnes [2]. > > Changes since V1: > - rebase to current linux-next > - add patches 1 - 4 for otg/gadget support > - add patch 5 with model compatible > - use polarity define for ACT LED > > [1] - http://lists.infradead.org/pipermail/linux-rpi-kernel/2016-February/003221.html > [2] - https://github.com/raspberrypi/linux/pull/1239/ > > Stefan Wahren (6): > usb: dwc2: core: Avoid nonsense error in gadget mode > usb: dwc2: Add DT properties to specify fifo size in host/otg mode > ARM: dts: bcm283x: Add missing usb clock > ARM: dts: bcm283x: Add generic USB PHY > DT: bindings: bcm: Add Raspberry Pi Zero > ARM: dts: bcm2835: Add Raspberry Pi Zero Where are we at on these? I've been holding off waiting for the USB bits to get settled. I can grab the bindings patch, but is there anything else we could merge while you're working on USB?
Attachment:
signature.asc
Description: PGP signature
