On Wed, Nov 27, 2013 at 12:13:25PM -0500, Matt Porter wrote: > On Tue, Nov 26, 2013 at 03:53:32PM +0530, Kishon Vijay Abraham I wrote: > > Hi, > > > > On Monday 25 November 2013 11:46 PM, Matt Porter wrote: > > > If a generic phy is present, call phy_init()/phy_exit(). This supports > > > generic phys that must be soft reset before power on. > > > > > > Signed-off-by: Matt Porter <matt.porter@xxxxxxxxxx> > > > --- > > > drivers/usb/gadget/s3c-hsotg.c | 5 +++++ > > > 1 file changed, 5 insertions(+) > > > > > > diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c > > > index da3879b..8dfe33f 100644 > > > --- a/drivers/usb/gadget/s3c-hsotg.c > > > +++ b/drivers/usb/gadget/s3c-hsotg.c > > > @@ -3622,6 +3622,9 @@ static int s3c_hsotg_probe(struct platform_device *pdev) > > > goto err_supplies; > > > } > > > > > > + if (hsotg->phy) > > > > IS_ERR? If your phy_get fails *phy* will have a error value.. > > Yes, thanks. I'll fix these and also note that the same issue exists in > Kamil's patch for these same hsotg->phy conditional uses. I'll work with > Kamil to either get those addressed there or in a follow on fix. I spoke too soon. If devm_phy_get fails, we don't set hsotg->phy and probe defer thus not reaching this point. Since hsotg->phy is either NULL or a valid struct phy *, this is correct as is throughout the driver. > > > > > + phy_init(hsotg->phy); > > > + > > > /* usb phy enable */ > > > s3c_hsotg_phy_enable(hsotg); > > > > > > @@ -3715,6 +3718,8 @@ static int s3c_hsotg_remove(struct platform_device *pdev) > > > } > > > > > > s3c_hsotg_phy_disable(hsotg); > > > + if (hsotg->phy) > > > > same here. > > Ok. Same above, this will be NULL on failure (but is only applicable at this point on the platform data path. -Matt -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html