Quoting Boris BREZILLON (2013-11-12 14:05:35) > This patch adds new at91 system clock implementation using common clk > framework. > > Some peripherals need to enable a "system" clock in order to work properly. > Each system clock is given an id based on the bit position in SCER/SCDR > registers. > > Signed-off-by: Boris BREZILLON <b.brezillon@xxxxxxxxxxx> > Acked-by: Nicolas Ferre <nicolas.ferre@xxxxxxxxx> > --- > drivers/clk/at91/Makefile | 1 + > drivers/clk/at91/clk-system.c | 137 +++++++++++++++++++++++++++++++++++++++++ > drivers/clk/at91/pmc.c | 5 ++ > drivers/clk/at91/pmc.h | 3 + > 4 files changed, 146 insertions(+) > create mode 100644 drivers/clk/at91/clk-system.c > > diff --git a/drivers/clk/at91/Makefile b/drivers/clk/at91/Makefile > index e28fb2b..c2b7068 100644 > --- a/drivers/clk/at91/Makefile > +++ b/drivers/clk/at91/Makefile > @@ -4,3 +4,4 @@ > > obj-y += pmc.o > obj-y += clk-main.o clk-pll.o clk-plldiv.o clk-master.o > +obj-y += clk-system.o > diff --git a/drivers/clk/at91/clk-system.c b/drivers/clk/at91/clk-system.c > new file mode 100644 > index 0000000..1c086f4 > --- /dev/null > +++ b/drivers/clk/at91/clk-system.c > @@ -0,0 +1,137 @@ > +/* > + * drivers/clk/at91/clk-system.c Nitpick: it's better to not put file paths in a comment block in case the file name or path is changed. Regards, Mike -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
