Add the clock and reset names for the Tegra210 Audio powergate. Please
note that these are not currently used, but added from completeness and
to be consistent with the other powergate nodes.
Signed-off-by: Jon Hunter <jonathanh@xxxxxxxxxx>
---
We added the clock and resets names for the XUSB partitions and so I
thought we should do the same for the Audio. Should I update the binding
documentation to say these should be provided? Currently it does not
state these are required. If we do update the binding doc, I was not
entirely sure what to put in the description for these properties.
Typically the clock and reset names would be fixed for a device, but here
we are not using them and so there are no fixed names.
arch/arm64/boot/dts/nvidia/tegra210.dtsi | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
index c4cfdcf60d26..92e987acc551 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
@@ -644,7 +644,9 @@
pd_audio: aud {
clocks = <&tegra_car TEGRA210_CLK_APE>,
<&tegra_car TEGRA210_CLK_APB2APE>;
+ clock-names = "ape", "apb2ape";
resets = <&tegra_car 198>;
+ reset-names = "ape";
#power-domain-cells = <0>;
};
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
