On Mon 18 Jul 22:04 PDT 2016, Bhushan Shah wrote:
> Cc: Andy Gross <andy.gross@xxxxxxxxxx>
> Cc: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> Cc: David Brown <david.brown@xxxxxxxxxx>
> Cc: Rob Herring <robh+dt@xxxxxxxxxx>
> Cc: Mark Rutland <mark.rutland@xxxxxxx>
> Cc: Russell King <linux@xxxxxxxxxxxxxxx>
> Cc: linux-arm-msm@xxxxxxxxxxxxxxx
> Cc: linux-soc@xxxxxxxxxxxxxxx
> Cc: devicetree@xxxxxxxxxxxxxxx
> Signed-off-by: Bhushan Shah <bshah@xxxxxxx>
> ---
> .../dts/qcom-msm8974-lge-nexus5-hammerhead.dts | 212 +++++++++++++++++++++
> 1 file changed, 212 insertions(+)
>
> diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
> index 68f3a8a..066a8dc 100644
> --- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
> +++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
> @@ -1,6 +1,8 @@
> #include "qcom-msm8974.dtsi"
> #include "qcom-pm8841.dtsi"
> #include "qcom-pm8941.dtsi"
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
>
> / {
> model = "LGE MSM 8974 HAMMERHEAD";
> @@ -13,6 +15,216 @@
> chosen {
> stdout-path = "serial0:115200n8";
> };
> +
> + smd {
> + rpm {
> + rpm_requests {
> + pm8841-regulators {
> + s1 {
> + regulator-min-microvolt = <675000>;
> + regulator-max-microvolt = <1050000>;
> + };
> +
> + s2 {
> + regulator-min-microvolt = <500000>;
> + regulator-max-microvolt = <1050000>;
> + };
> +
> + s3 {
> + regulator-min-microvolt = <1050000>;
> + regulator-max-microvolt = <1050000>;
> + };
> +
> + s4 {
> + regulator-min-microvolt = <815000>;
> + regulator-max-microvolt = <900000>;
> + };
> + };
> +
> + pm8941-regulators {
> + vdd_l1_l3-supply = <&pm8941_s1>;
> + vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
> + vdd_l4_l11-supply = <&pm8941_s1>;
> + vdd_l5_l7-supply = <&pm8941_s2>;
> + vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
> + vdd_l8_l16_l18_l19-supply = <&vph_pwr_reg>;
> + vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
> + vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
> + vdd_l21-supply = <&vreg_boost>;
> +
> + s1 {
> + regulator-min-microvolt = <1300000>;
> + regulator-max-microvolt = <1300000>;
> +
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + s2 {
> + regulator-min-microvolt = <2150000>;
> + regulator-max-microvolt = <2150000>;
> +
> + regulator-boot-on;
> + };
> +
> + s3 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> +
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + l1 {
> + regulator-min-microvolt = <1225000>;
> + regulator-max-microvolt = <1225000>;
> +
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + l2 {
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + };
> +
> + l3 {
> + regulator-min-microvolt = <1225000>;
> + regulator-max-microvolt = <1225000>;
> + };
> +
> + l4 {
> + regulator-min-microvolt = <1225000>;
> + regulator-max-microvolt = <1225000>;
> + };
> +
> + l5 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + l6 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> +
> + regulator-boot-on;
> + };
> +
> + l7 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> +
> + regulator-boot-on;
> + };
> +
> + l8 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + l9 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <2950000>;
> + };
> +
> + l10 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <2950000>;
> + };
> +
> + l11 {
> + regulator-min-microvolt = <1300000>;
> + regulator-max-microvolt = <1300000>;
> + };
> +
> + l12 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> +
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + l13 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <2950000>;
> +
> + regulator-boot-on;
> + };
> +
> + l14 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + l15 {
> + regulator-min-microvolt = <2050000>;
> + regulator-max-microvolt = <2050000>;
> + };
> +
> + l16 {
> + regulator-min-microvolt = <2700000>;
> + regulator-max-microvolt = <2700000>;
> + };
> +
> + l17 {
> + regulator-min-microvolt = <2850000>;
> + regulator-max-microvolt = <2850000>;
> + };
> +
> + l18 {
> + regulator-min-microvolt = <2850000>;
> + regulator-max-microvolt = <2850000>;
> + };
> +
> + l19 {
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + l20 {
> + regulator-min-microvolt = <2950000>;
> + regulator-max-microvolt = <2950000>;
> +
> + regulator-boot-on;
> + };
> +
> + l21 {
> + regulator-min-microvolt = <2950000>;
> + regulator-max-microvolt = <2950000>;
> +
> + regulator-boot-on;
> + };
> +
> + l22 {
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + l23 {
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + };
> +
> + l24 {
> + regulator-min-microvolt = <3075000>;
> + regulator-max-microvolt = <3075000>;
> +
> + regulator-boot-on;
> + };
> + };
> + };
> + };
> + };
Looks good, for this part:
Reviewed-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> +
> + vreg_boost {
> + gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&boost_bypass_n_pin>;
> + };
Please update the Honami patch and drop this node.
Regards,
Bjorn
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
