RE: [PATCH v11 4/5] powerpc/fsl: move mpc85xx.h to include/linux/fsl

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi Scott,


> -----Original Message-----
> From: Scott Wood [mailto:oss@xxxxxxxxxxxx]
> Sent: Friday, July 22, 2016 12:45 AM
> To: Michael Ellerman; Arnd Bergmann
> Cc: linux-mmc@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx; linuxppc-
> dev@xxxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; Yangbo Lu
> Subject: Re: [PATCH v11 4/5] powerpc/fsl: move mpc85xx.h to
> include/linux/fsl
> 
> On Thu, 2016-07-21 at 20:26 +1000, Michael Ellerman wrote:
> > Quoting Scott Wood (2016-07-21 04:31:48)
> > >
> > > On Wed, 2016-07-20 at 13:24 +0200, Arnd Bergmann wrote:
> > > >
> > > > On Saturday, July 16, 2016 9:50:21 PM CEST Scott Wood wrote:
> > > > >
> > > > >
> > > > > From: yangbo lu <yangbo.lu@xxxxxxx>
> > > > >
> > > > > Move mpc85xx.h to include/linux/fsl and rename it to svr.h as a
> > > > > common header file.  This SVR numberspace is used on some ARM
> > > > > chips as well as PPC, and even to check for a PPC SVR multi-arch
> > > > > drivers would otherwise need to ifdef the header inclusion and
> > > > > all references to the SVR symbols.
> > > > >
> > > > > Signed-off-by: Yangbo Lu <yangbo.lu@xxxxxxx>
> > > > > Acked-by: Wolfram Sang <wsa@xxxxxxxxxxxxx>
> > > > > Acked-by: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
> > > > > Acked-by: Joerg Roedel <jroedel@xxxxxxx>
> > > > > [scottwood: update description]
> > > > > Signed-off-by: Scott Wood <oss@xxxxxxxxxxxx>
> > > > >
> > > > As discussed before, please don't introduce yet another vendor
> > > > specific way to match a SoC ID from a device driver.
> > > >
> > > > I've posted a patch for an extension to the soc_device
> > > > infrastructure to allow comparing the running SoC to a table of
> > > > devices, use that instead.
> > > As I asked before, in which relevant maintainership capacity are you
> > > NACKing this?
> > I'll nack the powerpc part until you guys can agree.
> 
> OK, I've pulled these patches out.
> 
> For the MMC issue I suggest using ifdef CONFIG_PPC and mfspr(SPRN_SVR)
> like the clock driver does[1] and we can revisit the issue if/when we
> need to do something similar on an ARM chip.

[Lu Yangbo-B47093] I remembered that Uffe had opposed us to introduce non-generic header files(like '#include <asm/mpc85xx.h>')
in mmc driver initially. So I think it will not be accepted to use ifdef CONFIG_PPC and mfspr(SPRN_SVR)...
And this method still couldn’t get SVR of ARM chip now.

Any other suggestion here?
Thank you very much.

- Yangbo Lu

> 
> -Scott
> 
> [1] One of the issues with Arnd's approach is that it wouldn't have
> worked for early things like the clock driver, and he didn't seem to mind
> using ifdef and
> mfspr() there.

��.n��������+%������w��{.n����z�{��ܨ}���Ơz�j:+v�����w����ޙ��&�)ߡ�a����z�ޗ���ݢj��w�f




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux