On 22/07/16 20:07, Mirza Krak wrote:
> 2016-07-22 11:32 GMT+02:00 Jon Hunter <jonathanh@xxxxxxxxxx>:
>>
>> On 21/07/16 21:10, Mirza Krak wrote:
>>> 2016-07-21 11:56 GMT+02:00 Jon Hunter <jonathanh@xxxxxxxxxx>:
>>>>
>>>> I wonder if it is worth mentioning that the chip-select specified in the
>>>> "nvidia,config" prop should match that in the "ranges" prop unless you
>>>> have some external decoding logic to provide an external chip-select.
>>>> Which raises a question, what does the chip-select in the ranges
>>>> actually represent? I am not sure if there is a common practice here for
>>>> device tree when boards have external logic to provide additional
>>>> chip-selects. I am sure this is quite common.
>>>
>>> I do not understand why CS pin setting in nvidia,config need to match
>>> the "ranges" prop? Other then maybe cosmetics.
>>
>> Yes it would be cosmetic. That said, I even wonder if CS needs to be
>> exposed at all given that they all map to the same CPU address space.
>> Couldn't your binding for the CAN devices be as follows?
>>
>> nor@70009000 {
>> ...
>>
>> can@48000000 {
>> ...
>> };
>>
>> can@48040000 {
>> ...
>> };
>> };
>
> This has also crossed my mind, maybe just get rid of the "ranges" prop
> and do like you have above. But then again I do not know what is
> preferred so I went with "ranges" prop initially.
>
>
>>
>> Problem is if you did have devices on different chip-selects then how
>> would these be handled? They could not point to the same physical
>> address. I am not sure if there is a way to do that in DT?
>
> Having trouble following your though here. We do not have "different"
> chip-selects?
I meant that the device has multiple chip-selects and so I was not sure
the best way to handle this for the GMI.
Jon
--
nvpublic
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
