On Mon, Jul 18, 2016 at 7:40 PM, Rob Herring <robh+dt@xxxxxxxxxx> wrote: > On Mon, Jul 18, 2016 at 6:12 PM, Frank Rowand <frowand.list@xxxxxxxxx> wrote: >> On 07/18/16 15:18, Rob Herring wrote: >>> On Fri, Jun 24, 2016 at 7:56 PM, Frank Rowand <frowand.list@xxxxxxxxx> wrote: >>>> From: Frank Rowand <frank.rowand@xxxxxxxxxxx> >>>> >>>> Do not require dtx_diff to be in $PATH. >>>> >>>> dt_to_config already needs to be run from the root directory of a kernel >>>> tree so use scripts/dtc/dtx_diff instead of dtx_diff. >>> >>> Okay, now I get a bit further. I get this message even if I set my >>> .config file on the command line: >>> >>> grep: ./.config: No such file or directory >> >> All of the following work for me: >> >> scripts/dtc/dt_to_config --config .config arch/arm/boot/dts/highbank.dts >> >> scripts/dtc/dt_to_config --config=.config arch/arm/boot/dts/highbank.dts >> >> scripts/dtc/dt_to_config --config ./.config arch/arm/boot/dts/highbank.dts >> >> scripts/dtc/dt_to_config --config=./.config arch/arm/boot/dts/highbank.dts >> >> What is the exact command line you are using? > > scripts/dtc/dt_to_config -c .build-arm/.config --config-format > arch/arm/boot/dts/highbank.dts > Above command works for me. >> >> Just to confirm, you are in the root directory of the kernel source tree >> and your .config is in the same directory (since you specified "./.config"). > > I'm in the root, but .config is not. > > Rob -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html