On Mon, Jul 18, 2016 at 6:12 PM, Frank Rowand <frowand.list@xxxxxxxxx> wrote: > On 07/18/16 15:18, Rob Herring wrote: >> On Fri, Jun 24, 2016 at 7:56 PM, Frank Rowand <frowand.list@xxxxxxxxx> wrote: >>> From: Frank Rowand <frank.rowand@xxxxxxxxxxx> >>> >>> Do not require dtx_diff to be in $PATH. >>> >>> dt_to_config already needs to be run from the root directory of a kernel >>> tree so use scripts/dtc/dtx_diff instead of dtx_diff. >> >> Okay, now I get a bit further. I get this message even if I set my >> .config file on the command line: >> >> grep: ./.config: No such file or directory > > All of the following work for me: > > scripts/dtc/dt_to_config --config .config arch/arm/boot/dts/highbank.dts > > scripts/dtc/dt_to_config --config=.config arch/arm/boot/dts/highbank.dts > > scripts/dtc/dt_to_config --config ./.config arch/arm/boot/dts/highbank.dts > > scripts/dtc/dt_to_config --config=./.config arch/arm/boot/dts/highbank.dts > > What is the exact command line you are using? scripts/dtc/dt_to_config -c .build-arm/.config --config-format arch/arm/boot/dts/highbank.dts > > Just to confirm, you are in the root directory of the kernel source tree > and your .config is in the same directory (since you specified "./.config"). I'm in the root, but .config is not. Rob -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html