I revised this series and rebased on top of Linus' tree. Patch specific changes are tracked in the respective email with their patch. On the level of the whole series, this changed: v2: - added 'clocksource/cadence_ttc: Use enable/disable_irq'. I hope that is more appropriate to avoid races of the timer with its interrupt handler. - added 'arm: zynq: Don't use arm_global_timer with cpufreq'. In the 3.13 merge window we enabled the arm_global_timer for Zynq. That timer is clocked by the CPU clock and hence does not provide a stable clocksource when cpufreq is enabled. That patch makes the selection of the GT driver depend on !CPU_FREQ for Zynq. Sören Soren Brinkmann (9): arm: dt: zynq: Remove 'clock-ranges' from TTC nodes arm: dt: zynq: Add 'cpus' node clocksource/cadence_ttc: Store timer frequency in driver data clocksource/cadence_ttc: Use enable/disable_irq clocksource/cadence_ttc: Adjust interval in clock notifier clocksource/cadence_ttc: Overhaul clocksource frequency adjustment clocksource/cadence_ttc: Use only one counter arm: zynq: Don't use arm_global_timer with cpufreq arm: zynq: Add support for cpufreq arch/arm/boot/dts/zynq-7000.dtsi | 27 +++- arch/arm/mach-zynq/Kconfig | 4 +- arch/arm/mach-zynq/common.c | 3 + drivers/clocksource/cadence_ttc_timer.c | 235 +++++++++++++++++++------------- 4 files changed, 174 insertions(+), 95 deletions(-) -- 1.8.4.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
