This patchset adds support for LG Nexus 5 phone, codenamed hammerhead.
Initial version have following supported,
- Serial console over headphone jack
- pm8841 and pm8941 regulator nodes
- Hardware keys (volume_up and volume_down)
Values for the regulator nodes are taken from following files in downstream msm
kernel tree, branch android-msm-hammerhead-3.4-marshmallow-mr2
- arch/arm/boot/dts/msm8974-regulator.dtsi
- arch/arm/boot/dts/msm8974-hammerhead/msm8974-hammerhead.dtsi
Values are verified against kmsg from downstream kernel as well.
However, it seems regulator-max-microvolt settings are not respected, for example,
l19{
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3300000>;
};
but in kmsg, it says,
[ 1.753401] l19: supplied by vph-pwr
[ 1.757418] l19: Bringing 0uV into 3000000-3000000uV
Relavant line from kmsg of downstream kernel says,
[ 0.255590] 8941_l19: 3000 <--> 3300 mV at 3300 mV normal idle
Is there anything wrong with dts?
Cc: Andy Gross <andy.gross@xxxxxxxxxx>
Cc: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
Cc: David Brown <david.brown@xxxxxxxxxx>
Cc: Mark Rutland <mark.rutland@xxxxxxx>
Cc: Rob Herring <robh+dt@xxxxxxxxxx>
Cc: Russell King <linux@xxxxxxxxxxxxxxx>
Cc: devicetree@xxxxxxxxxxxxxxx
Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
Cc: linux-arm-msm@xxxxxxxxxxxxxxx
Bhushan Shah (3):
ARM: dts: qcom: Add initial DTS for LG Nexus 5 Phone
ARM: dts: msm8974-hammerhead: Add regulator nodes for hammerhead
ARM: dts: msm8974-hammerhead: Introduce gpio-keys nodes
arch/arm/boot/dts/Makefile | 1 +
.../dts/qcom-msm8974-lge-nexus5-hammerhead.dts | 296 +++++++++++++++++++++
2 files changed, 297 insertions(+)
create mode 100644 arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
--
2.9.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
