This is a router based on the mv88f5181 chipset. http://www.netgear.com/support/product/WNR854T.aspx http://wiki.openwrt.org/toh/netgear/wnr854t Signed-off-by: Jamie Lentin <jm@xxxxxxxxxxxx> --- .../bindings/arm/marvell/marvell,orion5x.txt | 1 + arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/orion5x-netgear-wnr854t.dts | 200 +++++++++++++++++++++ arch/arm/mach-orion5x/Kconfig | 6 + arch/arm/mach-orion5x/Makefile | 1 + arch/arm/mach-orion5x/board-wnr854t.c | 78 ++++++++ 6 files changed, 287 insertions(+) create mode 100644 arch/arm/boot/dts/orion5x-netgear-wnr854t.dts create mode 100644 arch/arm/mach-orion5x/board-wnr854t.c diff --git a/Documentation/devicetree/bindings/arm/marvell/marvell,orion5x.txt b/Documentation/devicetree/bindings/arm/marvell/marvell,orion5x.txt index ff3c120..748a8f2 100644 --- a/Documentation/devicetree/bindings/arm/marvell/marvell,orion5x.txt +++ b/Documentation/devicetree/bindings/arm/marvell/marvell,orion5x.txt @@ -22,3 +22,4 @@ board. Currently known boards are: "lacie,d2-network" "marvell,rd-88f5182-nas" "maxtor,shared-storage-2" +"netgear,wnr854t" diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 95c1923..63b9202 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -535,6 +535,7 @@ dtb-$(CONFIG_ARCH_ORION5X) += \ orion5x-linkstation-lswtgl.dtb \ orion5x-lswsgl.dtb \ orion5x-maxtor-shared-storage-2.dtb \ + orion5x-netgear-wnr854t.dtb \ orion5x-rd88f5182-nas.dtb dtb-$(CONFIG_ARCH_PRIMA2) += \ prima2-evb.dtb diff --git a/arch/arm/boot/dts/orion5x-netgear-wnr854t.dts b/arch/arm/boot/dts/orion5x-netgear-wnr854t.dts new file mode 100644 index 0000000..a8e89d8 --- /dev/null +++ b/arch/arm/boot/dts/orion5x-netgear-wnr854t.dts @@ -0,0 +1,200 @@ +/* + * Copyright (C) 2014 Jamie Lentin <jm@xxxxxxxxxxxx> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include "orion5x-mv88f5181.dtsi" + +/ { + model = "Netgear WNR854-t"; + compatible = "netgear,wnr854t", "marvell,orion5x-88f5181", + "marvell,orion5x"; + + memory { + reg = <0x00000000 0x2000000>; /* 32 MB */ + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + linux,stdout-path = &uart0; + }; + + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>, + <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>, + <MBUS_ID(0x01, 0x0f) 0 0xf4000000 0x800000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-0 = <&pmx_reset_switch>; + pinctrl-names = "default"; + + reset { + label = "Reset Button"; + linux,code = <KEY_RESTART>; + gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-0 = <&pmx_power_led &pmx_power_led_blink &pmx_wan_led>; + pinctrl-names = "default"; + + led@0 { + label = "power:green"; + gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; + }; + + led@1 { + label = "power:blink"; + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + }; + + led@2 { + label = "wan:green"; + gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; + }; + }; + + dsa@0 { + compatible = "marvell,dsa"; + #address-cells = <1>; + #size-cells = <0>; + + dsa,ethernet = <ðport>; + dsa,mii-bus = <&mdio>; + + switch@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0>; /* MDIO address 0, switch 0 in tree */ + + port@0 { + reg = <0>; + label = "lan3"; + }; + + port@1 { + reg = <1>; + label = "lan4"; + }; + + port@2 { + reg = <2>; + label = "wan"; + }; + + port@3 { + reg = <3>; + label = "cpu"; + }; + + port@5 { + reg = <5>; + label = "lan1"; + }; + + port@7 { + reg = <7>; + label = "lan2"; + }; + }; + }; +}; + +&devbus_bootcs { + status = "okay"; + + devbus,keep-config; + + flash@0 { + compatible = "cfi-flash"; + reg = <0 0x800000>; + bank-width = <1>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "kernel"; + reg = <0x0 0x100000>; + }; + + partition@100000 { + label = "rootfs"; + reg = <0x100000 0x660000>; + }; + + partition@760000 { + label = "uboot_env"; + reg = <0x760000 0x20000>; + }; + + partition@780000 { + label = "uboot"; + reg = <0x780000 0x80000>; + read-only; + }; + }; +}; + +&mdio { + status = "okay"; +}; + +ð { + status = "okay"; + ethernet-port@0 { + speed = <1000>; + duplex = <1>; + }; +}; + +&pinctrl { + pinctrl-0 = <&pmx_pci_gpios &pmx_ge>; + pinctrl-names = "default"; + + pmx_power_led: pmx-power-led { + marvell,pins = "mpp0"; + marvell,function = "gpio"; + }; + + pmx_reset_switch: pmx-reset-switch { + marvell,pins = "mpp1"; + marvell,function = "gpio"; + }; + + pmx_power_led_blink: pmx-power-led-blink { + marvell,pins = "mpp2"; + marvell,function = "gpio"; + }; + + pmx_wan_led: pmx-wan-led { + marvell,pins = "mpp3"; + marvell,function = "gpio"; + }; + + pmx_pci_gpios: pmx-pci-gpios { + marvell,pins = "mpp4"; + marvell,function = "gpio"; + }; + + pmx_ge: pmx-ge { + marvell,pins = "mpp9", "mpp12", "mpp13", "mpp14", "mpp15", + "mpp16", "mpp17", "mpp18", "mpp19"; + marvell,function = "ge"; + }; +}; + +&uart0 { + /* Pin 1: Tx, Pin 7: Rx, Pin 8: Gnd */ + status = "okay"; +}; diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig index a2af158..1fdb95d 100644 --- a/arch/arm/mach-orion5x/Kconfig +++ b/arch/arm/mach-orion5x/Kconfig @@ -151,6 +151,12 @@ config MACH_MSS2_DT Say 'Y' here if you want your kernel to support the Maxtor Shared Storage II platform. +config MACH_WNR854T_DT + bool "Netgear WNR854T (Flattened Device Tree)" + help + Say 'Y' here if you want your kernel to support the + Netgear WNR854T platform. + config MACH_WNR854T bool "Netgear WNR854T" help diff --git a/arch/arm/mach-orion5x/Makefile b/arch/arm/mach-orion5x/Makefile index 4b2502b..9dff2d3 100644 --- a/arch/arm/mach-orion5x/Makefile +++ b/arch/arm/mach-orion5x/Makefile @@ -24,3 +24,4 @@ obj-$(CONFIG_ARCH_ORION5X_DT) += board-dt.o obj-$(CONFIG_MACH_D2NET_DT) += board-d2net.o obj-$(CONFIG_MACH_MSS2_DT) += board-mss2.o obj-$(CONFIG_MACH_RD88F5182_DT) += board-rd88f5182.o +obj-$(CONFIG_MACH_WNR854T_DT) += board-wnr854t.o diff --git a/arch/arm/mach-orion5x/board-wnr854t.c b/arch/arm/mach-orion5x/board-wnr854t.c new file mode 100644 index 0000000..c506e33 --- /dev/null +++ b/arch/arm/mach-orion5x/board-wnr854t.c @@ -0,0 +1,78 @@ +/* + * Netgear WNR854T PCI setup + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ +#include <linux/gpio.h> +#include <linux/platform_device.h> +#include <linux/pci.h> +#include <asm/mach/pci.h> +#include "common.h" +#include "orion5x.h" + +#define WNR854T_PCI_SLOT0_OFFS 7 +#define WNR854T_PCI_SLOT0_IRQ_PIN 4 + +static void __init wnr854t_pci_preinit(void) +{ + int pin; + + /* + * Configure PCI GPIO IRQ pins + */ + pin = WNR854T_PCI_SLOT0_IRQ_PIN; + if (gpio_request(pin, "PCI Int") == 0) { + if (gpio_direction_input(pin) == 0) { + irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW); + } else { + pr_err("wnr854t_pci_preinit failed to set_irq_type pin %d\n", + pin); + gpio_free(pin); + } + } else { + pr_err("wnr854t_pci_preinit failed to request gpio %d\n", pin); + } +} + +static int __init wnr854t_pci_map_irq(const struct pci_dev *dev, u8 slot, + u8 pin) +{ + int irq; + + /* + * Check for devices with hard-wired IRQs. + */ + irq = orion5x_pci_map_irq(dev, slot, pin); + if (irq != -1) + return irq; + + /* + * PCI IRQs are connected via GPIOs + */ + switch (slot - WNR854T_PCI_SLOT0_OFFS) { + case 0: + return gpio_to_irq(WNR854T_PCI_SLOT0_IRQ_PIN); + default: + return -1; + } +} + +static struct hw_pci wnr854t_pci __initdata = { + .nr_controllers = 2, + .preinit = wnr854t_pci_preinit, + .setup = orion5x_pci_sys_setup, + .scan = orion5x_pci_sys_scan_bus, + .map_irq = wnr854t_pci_map_irq, +}; + +static int __init wnr854t_pci_init(void) +{ + if (of_machine_is_compatible("netgear,wnr854t")) + pci_common_init(&wnr854t_pci); + + return 0; +} +/* NB: Use late_initcall so we can gpio_request() without being deferred */ +late_initcall(wnr854t_pci_init); -- 2.8.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
