Re: [PATCH 1/4] ARM: dts: sun8i: Extend Orange Pi PC dt to also handle the PC Plus

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi,

On 13-07-16 10:45, Maxime Ripard wrote:
On Sat, Jul 09, 2016 at 10:21:55PM +0200, Hans de Goede wrote:
There is a new Orange Pi PC Plus available now, rather then adding
yet another dts file for this variant, extend the existing
Orange Pi PC to support the sdio wifi and emmc found on this variant.

Downside of this approach is the following messages in dmesg when run
on the non Plus Orange Pi PC:

sunxi-mmc 1c10000.mmc: fatal err update clk timeout
sunxi-mmc 1c11000.mmc: smc 2 err, cmd 8, RTO !!
sunxi-mmc 1c11000.mmc: smc 2 err, cmd 55, RTO !!
sunxi-mmc 1c11000.mmc: smc 2 err, cmd 55, RTO !!
sunxi-mmc 1c11000.mmc: smc 2 err, cmd 55, RTO !!
sunxi-mmc 1c11000.mmc: smc 2 err, cmd 55, RTO !!
sunxi-mmc 1c11000.mmc: smc 2 err, cmd 1, RTO !!

Note these are completely harmless and there is no adverse effect
to the functioning of the non Plus Orange Pi PC.

Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
 arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts | 40 +++++++++++++++++++++++++++++-
 1 file changed, 39 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
index b8340f7..f9bf260 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
@@ -49,11 +49,13 @@
 #include <dt-bindings/pinctrl/sun4i-a10.h>

 / {
-	model = "Xunlong Orange Pi PC";
+	model = "Xunlong Orange Pi PC / PC Plus";
 	compatible = "xunlong,orangepi-pc", "allwinner,sun8i-h3";

 	aliases {
 		serial0 = &uart0;
+		/* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */
+		ethernet1 = &rtl8189ftv;
 	};

 	chosen {
@@ -118,6 +120,42 @@
 	status = "okay";
 };

+/* Note only present on orangepi pc *plus* */
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins_a>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	/*
+	 * Explicitly define the sdio device, so that we can add an ethernet
+	 * alias for it (which e.g. makes u-boot set a mac-address).
+	 */
+	rtl8189ftv: sdio_wifi@1 {
+		reg = <1>;
+	};
+};

Nothing prevents you from including the orange pi pc dts, from the
orange pi plus dts.

It prevents the duplication you were trying to avoid, and it doesn't
create all those spurious errors and devices.

That would solve the copy paste problem on the kernel side, but that
would still mean adding a new u-boot defconfig for this, which means that
all the distro's which ship with prebuild u-boot binaries need to build
for yet another board, something which I would like to avoid.

Regards,

Hans
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux