Dear Rob,
On 2016/7/11 22:58, Rob Herring wrote:
On Thu, Jul 07, 2016 at 10:54:24AM +0800, William Wu wrote:
Add a quirk to configure the core to support the
UTMI+ PHY with an 8- or 16-bit interface. UTMI+ PHY
interface is hardware property, and it's platform
dependent. Normall, the PHYIf can be configured
s/Normall/Normally/
Yeah，I'll fix it.:-)
s/PHYIf/PHYIF/
Refer to DWC3 controller databook, "PHY Interface" called "PHYIf",
so I describe "PHYIf" here. However， "PHYIF”seems more the norm,
I'll fix it.:-)
during coreconsultant. But for some specific usb
s/usb/USB/
Thanks, I'll fix it.:-)
cores(e.g. rk3399 soc dwc3), the default PHYIf
configuration value is fault, so we need to
reconfigure it by software.
And refer to the dwc3 databook, the GUSB2PHYCFG.USBTRDTIM
s/dwc3/DWC3/
Thanks, I'll fix it too.
must be set to the corresponding value according to
the UTMI+ PHY interface.
And wrap your lines at 70-74 characters.
Thanks for your suggestion, I'll pay attention to this problem next
patch.:-)
Best Regards，
William Wu
Rob
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
