On Thu, Jul 07, 2016 at 10:54:24AM +0800, William Wu wrote: > Add a quirk to configure the core to support the > UTMI+ PHY with an 8- or 16-bit interface. UTMI+ PHY > interface is hardware property, and it's platform > dependent. Normall, the PHYIf can be configured s/Normall/Normally/ s/PHYIf/PHYIF/ > during coreconsultant. But for some specific usb s/usb/USB/ > cores(e.g. rk3399 soc dwc3), the default PHYIf > configuration value is fault, so we need to > reconfigure it by software. > > And refer to the dwc3 databook, the GUSB2PHYCFG.USBTRDTIM s/dwc3/DWC3/ > must be set to the corresponding value according to > the UTMI+ PHY interface. And wrap your lines at 70-74 characters. Rob -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
