Add bindings documentation for Altera SOCFPGA bridges:
* fpga2sdram
* fpga2hps
* hps2fpga
* lwhps2fpga
Signed-off-by: Alan Tull <atull@xxxxxxxxxxxxxxxxxxxxx>
Signed-off-by: Matthew Gerlach <mgerlach@xxxxxxxxxx>
Signed-off-by: Dinh Nguyen <dinguyen@xxxxxxxxxxxxxxxxxxxxx>
---
v2: separate into 2 documents for the 2 drivers
v12: bump version to line up with simple-fpga-bus version
remove Linux specific notes such as references to sysfs
move non-DT specific documentation elsewhere
remove bindings that would have been used to pass configuration
clean up formatting
v13: Remove 'label' property
Change property from init-val to bridge-enable
Fix email address
v14: Add resets
Change order of bridges to put lw bridge (controlling bridge) first
v15: No change in this patch for v15 of this patch set
v16: Added regs property, cleaned up unit addresses
v17: No change to this patch in v17 of patch set
v18: Changed to not need reset-names property
node names as fpga-bridge@...
labels as fpga_bridge
Add address of fpgaportrst to give and address for f2s bridge
---
.../bindings/fpga/altera-fpga2sdram-bridge.txt | 16 +++++++++
.../bindings/fpga/altera-hps2fpga-bridge.txt | 39 ++++++++++++++++++++++
2 files changed, 55 insertions(+)
create mode 100644 Documentation/devicetree/bindings/fpga/altera-fpga2sdram-bridge.txt
create mode 100644 Documentation/devicetree/bindings/fpga/altera-hps2fpga-bridge.txt
diff --git a/Documentation/devicetree/bindings/fpga/altera-fpga2sdram-bridge.txt b/Documentation/devicetree/bindings/fpga/altera-fpga2sdram-bridge.txt
new file mode 100644
index 0000000..817a8d4
--- /dev/null
+++ b/Documentation/devicetree/bindings/fpga/altera-fpga2sdram-bridge.txt
@@ -0,0 +1,16 @@
+Altera FPGA To SDRAM Bridge Driver
+
+Required properties:
+- compatible : Should contain "altr,socfpga-fpga2sdram-bridge"
+
+Optional properties:
+- bridge-enable : 0 if driver should disable bridge at startup
+ 1 if driver should enable bridge at startup
+ Default is to leave bridge in current state.
+
+Example:
+ fpga_bridge3: fpga-bridge@ffc25080 {
+ compatible = "altr,socfpga-fpga2sdram-bridge";
+ reg = <0xffc25080 0x4>;
+ bridge-enable = <0>;
+ };
diff --git a/Documentation/devicetree/bindings/fpga/altera-hps2fpga-bridge.txt b/Documentation/devicetree/bindings/fpga/altera-hps2fpga-bridge.txt
new file mode 100644
index 0000000..6406f93
--- /dev/null
+++ b/Documentation/devicetree/bindings/fpga/altera-hps2fpga-bridge.txt
@@ -0,0 +1,39 @@
+Altera FPGA/HPS Bridge Driver
+
+Required properties:
+- regs : base address and size for AXI bridge module
+- compatible : Should contain one of:
+ "altr,socfpga-lwhps2fpga-bridge",
+ "altr,socfpga-hps2fpga-bridge", or
+ "altr,socfpga-fpga2hps-bridge"
+- resets : Phandle and reset specifier for this bridge's reset
+- clocks : Clocks used by this module.
+
+Optional properties:
+- bridge-enable : 0 if driver should disable bridge at startup.
+ 1 if driver should enable bridge at startup.
+ Default is to leave bridge in its current state.
+
+Example:
+ fpga_bridge0: fpga-bridge@ff400000 {
+ compatible = "altr,socfpga-lwhps2fpga-bridge";
+ reg = <0xff400000 0x100000>;
+ resets = <&rst LWHPS2FPGA_RESET>;
+ clocks = <&l4_main_clk>;
+ bridge-enable = <0>;
+ };
+
+ fpga_bridge1: fpga-bridge@ff500000 {
+ compatible = "altr,socfpga-hps2fpga-bridge";
+ reg = <0xff500000 0x10000>;
+ resets = <&rst HPS2FPGA_RESET>;
+ clocks = <&l4_main_clk>;
+ bridge-enable = <1>;
+ };
+
+ fpga_bridge2: fpga-bridge@ff600000 {
+ compatible = "altr,socfpga-fpga2hps-bridge";
+ reg = <0xff600000 0x100000>;
+ resets = <&rst FPGA2HPS_RESET>;
+ clocks = <&l4_main_clk>;
+ };
--
2.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
