This patch adds device tree documentation for the sbs-manager
Reviewed-by: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
Signed-off-by: Karl-Heinz Schneider <karl-heinz@xxxxxxxxxxxxxxxxx>
---
.../devicetree/bindings/power/sbs,sbs-manager.txt | 52 ++++++++++++++++++++++
1 file changed, 52 insertions(+)
create mode 100644 Documentation/devicetree/bindings/power/sbs,sbs-manager.txt
diff --git a/Documentation/devicetree/bindings/power/sbs,sbs-manager.txt b/Documentation/devicetree/bindings/power/sbs,sbs-manager.txt
new file mode 100644
index 0000000..f0e2253
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/sbs,sbs-manager.txt
@@ -0,0 +1,52 @@
+Binding for sbs-manager
+
+Required properties:
+- compatible: should be "lltc,ltc1760" or use "sbs,sbs-manager" as fallback.
+- reg: integer, i2c address of the device. Should be <0xa>.
+
+From OS view the device is basically an i2c-mux used to communicate with up to
+four smart battery devices at address 0xb. The driver actually implements this
+behaviour. So standard i2c-mux nodes can be used to register up to four slave
+batteries. Channels will be numerated starting from 1 to 4.
+
+Example:
+
+batman@0a {
+ compatible = "lltc,ltc1760";
+ reg = <0x0a>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ battery@0b {
+ compatible = "ti,bq2060", "sbs,sbs-battery";
+ reg = <0x0b>;
+ };
+ };
+
+ i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+
+ battery@0b {
+ compatible = "ti,bq2060", "sbs,sbs-battery";
+ reg = <0x0b>;
+ };
+ };
+
+ i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ battery@0b {
+ compatible = "ti,bq2060", "sbs,sbs-battery";
+ reg = <0x0b>;
+ };
+ };
+};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
