Hi, this patchset adds DT binding docs and a drm_bridge driver for the Toshiba TC358767 eDP bridge, currently supporting only 24-bit DPI input and control via I2C. The chip is also capable to act as a DSI sink, but the driver doesn't support that yet. It is based on Andrey's initial driver, which can be found at https://github.com/CogentEmbedded/linux-zodiac.git, commit 4abb1d0a9a1c ("drm/i2c: tc358767 eDP encoder initial commit"). I have turned it into a drm_bridge driver and changed it to use regmap and the drm_dp helpers. Changes since v1: - Explicitly describe DSI and DPI input ports in device tree, this moves DPI input to port@1 and eDP/DP output to port@2. - Replaced the regmap_read_poll_timeout macro with a function. - Rebased on top of SiI902x driver merge to avoid Makefile/Kconfig conflicts. - Fixed tc_pxl_pll_en: removed unnecessary checks, whitespace and comment improvements. - Switched to atomic connector funcs. regards Philipp Andrey Gusakov (1): drm/bridge: tc358767: Add DPI to eDP bridge driver Philipp Zabel (1): dt-bindings: tc358767: add DT documentation .../bindings/display/bridge/toshiba,tc358767.txt | 51 + drivers/gpu/drm/bridge/Kconfig | 8 + drivers/gpu/drm/bridge/Makefile | 1 + drivers/gpu/drm/bridge/tc358767.c | 1421 ++++++++++++++++++++ 4 files changed, 1481 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.txt create mode 100644 drivers/gpu/drm/bridge/tc358767.c -- 2.8.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
