Add DT binding documentation for the Toshiba TC358767 eDP bridge.
Signed-off-by: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
---
Changes since v1:
- Explicitly describe DSI and DPI input ports in device tree, this moves
DPI input to port@1 and eDP/DP output to port@2.
---
.../bindings/display/bridge/toshiba,tc358767.txt | 51 ++++++++++++++++++++++
1 file changed, 51 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.txt
diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.txt b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.txt
new file mode 100644
index 0000000..05ada28
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.txt
@@ -0,0 +1,51 @@
+Toshiba TC358767 eDP bridge bindings
+
+Required properties:
+ - compatible: "toshiba,tc358767"
+ - reg: i2c address of the bridge, 0x68 or 0x0f, depending on bootstrap pins
+ - clock-names: should be "ref"
+ - clocks: OF device-tree clock specification for refclk input. The reference
+ clock rate must be 13 MHz, 19.2 MHz, 26 MHz, or 38.4 MHz.
+
+Optional properties:
+ - shutdown-gpios: OF device-tree gpio specification for SD pin
+ (active high shutdown input)
+ - reset-gpios: OF device-tree gpio specification for RSTX pin
+ (active low system reset)
+ - ports: the ports node can contain video interface port nodes to connect
+ to a DPI/DSI source and to an eDP/DP sink according to [1][2]:
+ - port@0: DSI input port
+ - port@1: DPI input port
+ - port@2: eDP/DP output port
+
+[1]: Documentation/devicetree/bindings/graph.txt
+[2]: Documentation/devicetree/bindings/media/video-interfaces.txt
+
+Example:
+ edp-bridge@68 {
+ compatible = "toshiba,tc358767";
+ reg = <0x68>;
+ shutdown-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
+ clock-names = "ref";
+ clocks = <&edp_refclk>;
+
+ ports {
+ port@1 {
+ reg = <1>;
+
+ bridge_in: endpoint {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ bridge_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+ };
+
--
2.8.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
