Re: [PATCH 2/2] drm/bridge: tc358767: Add DPI to eDP bridge driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Am Montag, den 11.07.2016, 14:02 +0530 schrieb Archit Taneja:
[...]
> >>> +	/* PXL PLL setup */
> >>> +	if (tc->test_pattern) {
> >>
> >> I couldn't find out who is setting tc->test_pattern. Is it always
> >> 0?
> >
> > Hm, you are right. I wonder what a good mechanism would be to enable a
> > test pattern for a bridge driver. Module parameters? We don't have
> > anyhting like V4L2_CID_TEST_PATTERN in drm. I could also drop test
> > pattern support from the initial patch and submit it separately.
> 
> Module parameter sounds like a good option.

Ok.

> Although, it seems like the pll is enabled only when test_pattern is
> set. How does the bridge work if the pll isn't enabled?

The PXL PLL is only necessary regenerate the pixel clock from the DSI HS
clock, or to create the test pattern. In DPI mode the pixel clock from
the parallel interface is used directly.

regards
Philipp

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux