On 2016年07月11日 05:56, Paul Gortmaker wrote:
On Sun, Jul 10, 2016 at 3:27 AM, Wan Zongshun <vw@xxxxxxxxx> wroteThis driver is to add reset support for nuc900 series, currently, it only supports nuc970 SoC reset. Signed-off-by: Wan Zongshun <mcuos.com@xxxxxxxxx> --- drivers/power/reset/Kconfig | 7 +++ drivers/power/reset/Makefile | 1 + drivers/power/reset/nuc900-reset.c | 93 ++++++++++++++++++++++++++++++++++++++ 3 files changed, 101 insertions(+) create mode 100644 drivers/power/reset/nuc900-reset.c diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig index 9bb2622..8c84892 100644 --- a/drivers/power/reset/Kconfig +++ b/drivers/power/reset/Kconfig @@ -94,6 +94,13 @@ config POWER_RESET_MSM help Power off and restart support for Qualcomm boards. +config POWER_RESET_NUC900 + bool "Nuc900 restart driver"If this driver is bool and not tristate, then please remove all references to MODULE_<xyz> and then the module.h include as well.
I will remove the following codes in my reset.c driver. MODULE_DEVICE_TABLE(of, of_nuc900_reset_match); #include <linux/module.h>
Thanks, Paul. --+ depends on ARCH_W90X900 + help + Power off and restart support for Nuvoton NUC900 family of + reference boards. + config POWER_RESET_LTC2952 bool "LTC2952 PowerPath power-off driver" depends on OF_GPIO diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile index ab7aa86..d4df889 100644 --- a/drivers/power/reset/Makefile +++ b/drivers/power/reset/Makefile @@ -9,6 +9,7 @@ obj-$(CONFIG_POWER_RESET_GPIO_RESTART) += gpio-restart.o obj-$(CONFIG_POWER_RESET_HISI) += hisi-reboot.o obj-$(CONFIG_POWER_RESET_IMX) += imx-snvs-poweroff.o obj-$(CONFIG_POWER_RESET_MSM) += msm-poweroff.o +obj-$(CONFIG_POWER_RESET_NUC900) += nuc900-reset.o obj-$(CONFIG_POWER_RESET_LTC2952) += ltc2952-poweroff.o obj-$(CONFIG_POWER_RESET_QNAP) += qnap-poweroff.o obj-$(CONFIG_POWER_RESET_RESTART) += restart-poweroff.o diff --git a/drivers/power/reset/nuc900-reset.c b/drivers/power/reset/nuc900-reset.c new file mode 100644 index 0000000..49986b7 --- /dev/null +++ b/drivers/power/reset/nuc900-reset.c @@ -0,0 +1,93 @@ +/* + * Copyright 2016 Wan Zongshun <mcuos.com@xxxxxxxxx> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#include <linux/init.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/mfd/syscon.h> +#include <linux/module.h> +#include <linux/notifier.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/reboot.h> +#include <linux/regmap.h>[...] _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
-- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
