On Sun, Jul 10, 2016 at 3:27 AM, Wan Zongshun <vw@xxxxxxxxx> wrote > This driver is to add reset support for nuc900 series, > currently, it only supports nuc970 SoC reset. > > Signed-off-by: Wan Zongshun <mcuos.com@xxxxxxxxx> > --- > drivers/power/reset/Kconfig | 7 +++ > drivers/power/reset/Makefile | 1 + > drivers/power/reset/nuc900-reset.c | 93 ++++++++++++++++++++++++++++++++++++++ > 3 files changed, 101 insertions(+) > create mode 100644 drivers/power/reset/nuc900-reset.c > > diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig > index 9bb2622..8c84892 100644 > --- a/drivers/power/reset/Kconfig > +++ b/drivers/power/reset/Kconfig > @@ -94,6 +94,13 @@ config POWER_RESET_MSM > help > Power off and restart support for Qualcomm boards. > > +config POWER_RESET_NUC900 > + bool "Nuc900 restart driver" If this driver is bool and not tristate, then please remove all references to MODULE_<xyz> and then the module.h include as well. Thanks, Paul. -- > + depends on ARCH_W90X900 > + help > + Power off and restart support for Nuvoton NUC900 family of > + reference boards. > + > config POWER_RESET_LTC2952 > bool "LTC2952 PowerPath power-off driver" > depends on OF_GPIO > diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile > index ab7aa86..d4df889 100644 > --- a/drivers/power/reset/Makefile > +++ b/drivers/power/reset/Makefile > @@ -9,6 +9,7 @@ obj-$(CONFIG_POWER_RESET_GPIO_RESTART) += gpio-restart.o > obj-$(CONFIG_POWER_RESET_HISI) += hisi-reboot.o > obj-$(CONFIG_POWER_RESET_IMX) += imx-snvs-poweroff.o > obj-$(CONFIG_POWER_RESET_MSM) += msm-poweroff.o > +obj-$(CONFIG_POWER_RESET_NUC900) += nuc900-reset.o > obj-$(CONFIG_POWER_RESET_LTC2952) += ltc2952-poweroff.o > obj-$(CONFIG_POWER_RESET_QNAP) += qnap-poweroff.o > obj-$(CONFIG_POWER_RESET_RESTART) += restart-poweroff.o > diff --git a/drivers/power/reset/nuc900-reset.c b/drivers/power/reset/nuc900-reset.c > new file mode 100644 > index 0000000..49986b7 > --- /dev/null > +++ b/drivers/power/reset/nuc900-reset.c > @@ -0,0 +1,93 @@ > +/* > + * Copyright 2016 Wan Zongshun <mcuos.com@xxxxxxxxx> > + * > + * The code contained herein is licensed under the GNU General Public > + * License. You may obtain a copy of the GNU General Public License > + * Version 2 or later at the following locations: > + * > + * http://www.opensource.org/licenses/gpl-license.html > + * http://www.gnu.org/copyleft/gpl.html > + */ > +#include <linux/init.h> > +#include <linux/err.h> > +#include <linux/io.h> > +#include <linux/kernel.h> > +#include <linux/mfd/syscon.h> > +#include <linux/module.h> > +#include <linux/notifier.h> > +#include <linux/of.h> > +#include <linux/platform_device.h> > +#include <linux/reboot.h> > +#include <linux/regmap.h> > [...] -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html