On 07/05/2016 08:48 AM, Rob Herring wrote:
On Sat, Jul 02, 2016 at 10:05:42AM -0700, Guenter Roeck wrote:
Provide generic bindings for all Jedec JC-42.4 compatible temperature
sensor chips.
Signed-off-by: Guenter Roeck <linux@xxxxxxxxxxxx>
---
RFC to address:
- Is "jc-42-4" ok to use for JC-42.4 ?
- JC42.4 really specifies an SPD EEPROM with included temperature sensor.
That would be at a different address?
Yes. The EEPROM is at address 0x5[0-7], the temperature sensor is at 0x1[8-f].
Is "jedec,jc42-4" appropriate, or should it rather be something like
"jedec,jc-42-4-sensor" ?
If yes, then probably the latter. Though I would do "temp" rather than
"sensor".
Also, "-42.4" is fine.
Ok, I'll use "jedec,jc-42.4-temp".
Documentation/devicetree/bindings/hwmon/jc42.txt | 42 ++++++++++++++++++++++++
1 file changed, 42 insertions(+)
create mode 100644 Documentation/devicetree/bindings/hwmon/jc42.txt
diff --git a/Documentation/devicetree/bindings/hwmon/jc42.txt b/Documentation/devicetree/bindings/hwmon/jc42.txt
new file mode 100644
index 000000000000..2bd604a93430
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/jc42.txt
@@ -0,0 +1,42 @@
+Properties for Jedec JC-42.4 compatible temperature sensors
+
+Required properties:
+- compatible: May include a device-specific string consisting of the
+ manufacturer and the name of the chip. A list of supported
+ chip names follows.
+ Must include "jedec,jc-42-4" for any Jedec JC-42.4 compatible
+ temperature sensor.
+
+ Supported chip names:
+ adt7408
+ at30ts00
+ at30tse004
+ cat6095
+ cat34ts02
+ max6604
+ mcp9804
+ mcp9805
+ mcp9808
+ mcp98243
+ mcp98244
+ mcp9843
+ se97
+ se98
+ stts2002
+ stts2004
+ stts3000
+ stts424
+ stts424e
+ tse2002
+ tse2004
+ ts3000
+ ts3001
These are all vendor independent names?
No. se97/se98 would be NXP, for example. I'll add the vendor prefixes.
Thanks,
Guenter
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
