On Sat, Jul 02, 2016 at 10:05:42AM -0700, Guenter Roeck wrote: > Provide generic bindings for all Jedec JC-42.4 compatible temperature > sensor chips. > > Signed-off-by: Guenter Roeck <linux@xxxxxxxxxxxx> > --- > RFC to address: > - Is "jc-42-4" ok to use for JC-42.4 ? > - JC42.4 really specifies an SPD EEPROM with included temperature sensor. That would be at a different address? > Is "jedec,jc42-4" appropriate, or should it rather be something like > "jedec,jc-42-4-sensor" ? If yes, then probably the latter. Though I would do "temp" rather than "sensor". Also, "-42.4" is fine. > Documentation/devicetree/bindings/hwmon/jc42.txt | 42 ++++++++++++++++++++++++ > 1 file changed, 42 insertions(+) > create mode 100644 Documentation/devicetree/bindings/hwmon/jc42.txt > > diff --git a/Documentation/devicetree/bindings/hwmon/jc42.txt b/Documentation/devicetree/bindings/hwmon/jc42.txt > new file mode 100644 > index 000000000000..2bd604a93430 > --- /dev/null > +++ b/Documentation/devicetree/bindings/hwmon/jc42.txt > @@ -0,0 +1,42 @@ > +Properties for Jedec JC-42.4 compatible temperature sensors > + > +Required properties: > +- compatible: May include a device-specific string consisting of the > + manufacturer and the name of the chip. A list of supported > + chip names follows. > + Must include "jedec,jc-42-4" for any Jedec JC-42.4 compatible > + temperature sensor. > + > + Supported chip names: > + adt7408 > + at30ts00 > + at30tse004 > + cat6095 > + cat34ts02 > + max6604 > + mcp9804 > + mcp9805 > + mcp9808 > + mcp98243 > + mcp98244 > + mcp9843 > + se97 > + se98 > + stts2002 > + stts2004 > + stts3000 > + stts424 > + stts424e > + tse2002 > + tse2004 > + ts3000 > + ts3001 These are all vendor independent names? > + > +- reg: I2C address > + > +Example: > + > +temp-sensor@1a { > + compatible = "jedec,jc-42-4"; > + reg = <0x18>; > +}; > -- > 2.5.0 > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html