The default eDP panel on RK3288 EVB board is LG LP079QX1-SP0V TFT LCD, we haven't declared the panel regulator in the 'panel-simple' device node here, so the specific board like ACT8846 / RK8080 need to support the panel power supply. Signed-off-by: Yakir Yang <ykk@xxxxxxxxxxxxxx> --- arch/arm/boot/dts/rk3288-evb.dtsi | 43 ++++++++++++++++++++++++++++++++++++++- 1 file changed, 42 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi index 963365d..f293c44 100644 --- a/arch/arm/boot/dts/rk3288-evb.dtsi +++ b/arch/arm/boot/dts/rk3288-evb.dtsi @@ -48,7 +48,7 @@ reg = <0x0 0x80000000>; }; - backlight { + backlight: backlight { compatible = "pwm-backlight"; brightness-levels = < 0 1 2 3 4 5 6 7 @@ -97,6 +97,20 @@ #clock-cells = <0>; }; + panel: panel { + compatible ="lg,lp079qx1-sp0v", "simple-panel"; + backlight = <&backlight>; + enable-gpios = <&gpio7 4 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&lcd_cs>; + ports { + panel_in: port { + panel_in_edp: endpoint { + remote-endpoint = <&edp_out_panel>; + }; + }; + }; + }; + gpio-keys { compatible = "gpio-keys"; autorepeat; @@ -216,6 +230,27 @@ status = "okay"; }; +&edp_phy { + status = "okay"; +}; + +&edp { + force-hpd; + status = "okay"; + + ports { + edp_out: port@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + edp_out_panel: endpoint { + reg = <0>; + remote-endpoint = <&panel_in_edp>; + }; + }; + }; +}; + &i2c0 { status = "okay"; }; @@ -322,6 +357,12 @@ rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_none>; }; }; + + lcd { + lcd_cs: lcd-cs { + rockchip,pins = <7 4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; }; &usbphy { -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html