Hi Ondrej,
On Fri, Jun 24, 2016 at 5:21 AM, <megous@xxxxxxxxxx> wrote:
> From: Ondrej Jirman <megous@xxxxxxxxxx>
>
> Xulong Orange Pi One uses GPIO based regulator that
> switches between two voltages: 1.1V and 1.3V. The
> regulator is controlled from the PL6 pin.
>
> Signed-off-by: Ondrej Jirman <megous@xxxxxxxxxx>
> ---
> arch/arm/boot/dts/sun8i-h3-orangepi-one.dts | 26 ++++++++++++++++++++++++++
> 1 file changed, 26 insertions(+)
>
> diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
> index 0adf932..ce4ba91 100644
> --- a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
> +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
> @@ -88,6 +88,25 @@
> gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
> };
> };
> +
> + vdd_soc: gpio-regulator {
> + compatible = "regulator-gpio";
> +
> + regulator-name = "soc-vdd-supply";
> + regulator-min-microvolt = <1100000>;
> + regulator-max-microvolt = <1300000>;
> + regulator-boot-on;
> + regulator-type = "voltage";
> +
> + gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>;
> + states = <1100000 0x0
> + 1300000 0x1>;
> +
> + startup-delay-us = <100000>;
> + enable-active-high;
Don't you need to reference the new pinctl node in this one?
Thanks,
--
Julian Calaby
Email: julian.calaby@xxxxxxxxx
Profile: http://www.google.com/profiles/julian.calaby/
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
