This patch adds pinctrl required for sdhci for external sd card
controller.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/msm8996-pins.dtsi | 48 ++++++++++++++++++++++++++++++
1 file changed, 48 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8996-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8996-pins.dtsi
index 551707a..6599404 100644
--- a/arch/arm64/boot/dts/qcom/msm8996-pins.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996-pins.dtsi
@@ -252,4 +252,52 @@
bias-pull-down;
};
};
+
+ sdc2_clk_on: sdc2_clk_on {
+ config {
+ pins = "sdc2_clk";
+ bias-disable; /* NO pull */
+ drive-strength = <16>; /* 16 MA */
+ };
+ };
+
+ sdc2_clk_off: sdc2_clk_off {
+ config {
+ pins = "sdc2_clk";
+ bias-disable; /* NO pull */
+ drive-strength = <2>; /* 2 MA */
+ };
+ };
+
+ sdc2_cmd_on: sdc2_cmd_on {
+ config {
+ pins = "sdc2_cmd";
+ bias-pull-up; /* pull up */
+ drive-strength = <10>; /* 10 MA */
+ };
+ };
+
+ sdc2_cmd_off: sdc2_cmd_off {
+ config {
+ pins = "sdc2_cmd";
+ bias-pull-up; /* pull up */
+ drive-strength = <2>; /* 2 MA */
+ };
+ };
+
+ sdc2_data_on: sdc2_data_on {
+ config {
+ pins = "sdc2_data";
+ bias-pull-up; /* pull up */
+ drive-strength = <10>; /* 10 MA */
+ };
+ };
+
+ sdc2_data_off: sdc2_data_off {
+ config {
+ pins = "sdc2_data";
+ bias-pull-up; /* pull up */
+ drive-strength = <2>; /* 2 MA */
+ };
+ };
};
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
