On Mon, Jun 13, 2016 at 07:33:59PM -0700, Duc Dang wrote:
> On Wed, Jun 8, 2016 at 12:48 PM, Rob Herring <robh@xxxxxxxxxx> wrote:
> > On Mon, Jun 06, 2016 at 03:17:56PM -0500, Bjorn Helgaas wrote:
> >> The convention in these files is to use lowercase for "0x" prefixes and for
> >> the hex constants themselves, but a few changes didn't follow that
> >> convention, which makes the file annoying to read.
> >>
> >> Use lowercase consistently for the hex constants. No functional change
> >> intended.
> >>
> >> Signed-off-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
> >> ---
> >> .../devicetree/bindings/net/apm-xgene-enet.txt | 4 +-
> >> arch/arm64/boot/dts/apm/apm-shadowcat.dtsi | 40 ++++++++++----------
> >> arch/arm64/boot/dts/apm/apm-storm.dtsi | 36 +++++++++---------
> >> 3 files changed, 40 insertions(+), 40 deletions(-)
> >>
> >> diff --git a/Documentation/devicetree/bindings/net/apm-xgene-enet.txt b/Documentation/devicetree/bindings/net/apm-xgene-enet.txt
> >> index 05f705e3..e41b2d5 100644
> >> --- a/Documentation/devicetree/bindings/net/apm-xgene-enet.txt
> >> +++ b/Documentation/devicetree/bindings/net/apm-xgene-enet.txt
> >> @@ -59,8 +59,8 @@ Example:
> >> compatible = "apm,xgene-enet";
> >> status = "disabled";
> >> reg = <0x0 0x17020000 0x0 0xd100>,
> >> - <0x0 0X17030000 0x0 0X400>,
> >> - <0x0 0X10000000 0x0 0X200>;
> >> + <0x0 0x17030000 0x0 0x400>,
> >> + <0x0 0x10000000 0x0 0x200>;
> >> reg-names = "enet_csr", "ring_csr", "ring_cmd";
> >> interrupts = <0x0 0x3c 0x4>;
> >> port-id = <0>;
> >> diff --git a/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi
> >> index c569f76..9773687 100644
> >> --- a/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi
> >> +++ b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi
> >> @@ -106,9 +106,9 @@
> >> interrupts = <1 9 0xf04>; /* GIC Maintenence IRQ */
> >> ranges = <0 0 0 0x79000000 0x0 0x800000>; /* MSI Range */
> >> reg = <0x0 0x78090000 0x0 0x10000>, /* GIC Dist */
> >> - <0x0 0x780A0000 0x0 0x20000>, /* GIC CPU */
> >> - <0x0 0x780C0000 0x0 0x10000>, /* GIC VCPU Control */
> >> - <0x0 0x780E0000 0x0 0x20000>; /* GIC VCPU */
> >> + <0x0 0x780a0000 0x0 0x20000>, /* GIC CPU */
> >> + <0x0 0x780c0000 0x0 0x10000>, /* GIC VCPU Control */
> >> + <0x0 0x780e0000 0x0 0x20000>; /* GIC VCPU */
> >> v2m0: v2m@0x00000 {
> >
> > Unit addresses should not have '0x' or leading 0s.
> >
> >> compatible = "arm,gic-v2m-frame";
> >> msi-controller;
> >> @@ -159,35 +159,35 @@
> >> msi-controller;
> >> reg = <0x0 0x90000 0x0 0x1000>;
> >> };
> >> - v2m10: v2m@0xA0000 {
> >> + v2m10: v2m@0xa0000 {
> >
> > and here...
>
> Thanks, Bjorn. Will you have time to post another version that
> addresses Rob's comment?
Sorry, I forgot to follow up on this. I didn't understand Rob's comment,
because my patch only changed uppercase/lowercase. I didn't add or remove
any '0x' or '0' prefixes.
>From the context, I infer that we should have "v2m10: v2m@a0000" instead of
"v2m10: v2m@0xa0000".
I'll make a second patch that makes that change. I do notice many other
DTs that have similar constructs, e.g.,
arch/arc/boot/dts/abilis_tb10x.dtsi: spi0: spi@0xFE010000 {
arch/arc/boot/dts/abilis_tb10x.dtsi: spi1: spi@0xFE011000 {
arch/arc/boot/dts/axc001.dtsi: dw-apb-gpio@0x2000 {
arch/arc/boot/dts/axc001.dtsi: debug_uart: dw-apb-uart@0x5000 {
...
Maybe more opportunities for cleanup?
Bjorn
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
