On Tue, Jun 07, 2016 at 07:37:09PM -0700, Stefan Agner wrote:
> +&lcdif {
> + status = "okay";
> + display = <&display0>;
Please put 'status' at the bottom of property list.
> +
> + display0: lcd-display {
> + bits-per-pixel = <16>;
> + bus-width = <18>;
> +
> + display-timings {
> + native-mode = <&timing_vga>;
> +
> + /* Standard VGA timing */
> + timing_vga: 640x480 {
> + clock-frequency = <25175000>;
> + hactive = <640>;
> + vactive = <480>;
> + hback-porch = <40>;
> + hfront-porch = <24>;
> + vback-porch = <32>;
> + vfront-porch = <11>;
> + hsync-len = <96>;
> + vsync-len = <2>;
> + de-active = <1>;
> + hsync-active = <0>;
> + vsync-active = <0>;
> + pixelclk-active = <0>;
> + };
> + };
> + };
> +};
<snip>
> +&usdhc1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_cd_usdhc1>;
> + no-1-8-v;
> + cd-gpios = <&gpio1 0 0>;
Use the macro in include/dt-bindings/gpio/gpio.h.
> + enable-sdio-wakeup;
This is deprecated. Please use wakeup-source instead.
> + fsl,tuning-step = <2>;
> + keep-power-in-suspend;
> + status = "okay";
> +};
<snip>
> +&fec1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_enet1>;
> + clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>,
> + <&clks IMX7D_ENET_AXI_ROOT_CLK>,
> + <&clks IMX7D_ENET1_TIME_ROOT_CLK>,
> + <&clks IMX7D_PLL_ENET_MAIN_50M_CLK>;
> + clock-names = "ipg", "ahb", "ptp", "enet_clk_ref";
> +
Drop this newline.
> + assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
> + <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
> + assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
> + assigned-clock-rates = <0>, <100000000>;
> + phy-mode = "rmii";
> + phy-supply = <®_LDO1>;
> + fsl,magic-packet;
> +};
<snip>
> +&uart1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart1 &pinctrl_uart1_ctrl1 &pinctrl_uart1_ctrl2>;
> + assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>;
> + assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
> + fsl,uart-has-rtscts;
Please use generic 'uart-has-rtscts' instead.
> + fsl,dte-mode;
> +};
> +
> +&uart2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart2>;
> + assigned-clocks = <&clks IMX7D_UART2_ROOT_SRC>;
> + assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
> + fsl,uart-has-rtscts;
Ditto
> + fsl,dte-mode;
> +};
<snip>
> +/ {
> + model = "Toradex Colibri iMX7D on Colibri Evaluation Board V3";
> + compatible = "toradex,colibri_imx7d-eval", "toradex,colibri_imx7d", \
We always use hyphen than underscore in compatible string.
> + "fsl,imx7d";
> +
> + reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
> + compatible = "regulator-fixed";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usbotg2_reg>;
> + regulator-name = "VCC_USB[1-4]";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + gpio = <&gpio4 7 GPIO_ACTIVE_LOW>;
> + };
> +};
> +/ {
> + model = "Toradex Colibri iMX7S on Colibri Evaluation Board V3";
> + compatible = "toradex,colibri_imx7s-eval", "toradex,colibri_imx7s", \
> + "fsl,imx7s", "fsl,imx7d";
You may not want to have "fsl,imx7d" here. Otherwise, the detection
between imx7s and imx7d colibri-eval-v3 board will be difficult.
Shawn
> +};
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
