Re: [PATCH v2 4/5] regulator: max14577: Add regulator driver for Maxim 14577

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Wed, 2013-11-20 at 18:58 +0100, Bartlomiej Zolnierkiewicz wrote:
> Err..
> 
> > I'm missing something obvious "info" is redundant and can be removed
> > altogether.
> > 
> > Best regards,
> > --
> > Bartlomiej Zolnierkiewicz
> > Samsung R&D Institute Poland
> > Samsung Electronics
> > 
> > > +	for (i = 0; i < pdata->num_regulators; i++) {
> > > +		int id = pdata->regulators[i].id;
> > > +
> > > +		config.init_data = pdata->regulators[i].initdata;
> > > +		config.of_node = pdata->regulators[i].of_node;
> > > +
> > > +		info->regulators[i] = devm_regulator_register(&pdev->dev,
> > > +				&supported_regulators[id], &config);
> > > +		if (IS_ERR(info->regulators[i])) {
> 
> This code actually reads from "info" but it can be fixed trivially
> to not require "info".

You're right, it can be removed. The info was a left-over from 3.10
where there isn't devm_regulator_register(). Thanks for review.


Best regards,
Krzysztof

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux