Re: [PATCH v2 4/5] regulator: max14577: Add regulator driver for Maxim 14577

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi Krzysztof,

On Wednesday, November 20, 2013 03:12:11 PM Krzysztof Kozlowski wrote:
> MAX14577 chip is a multi-function device which includes MUIC,
> charger and voltage regulator. The driver is located in drivers/mfd.
> 
> This patch adds regulator driver for MAX14577 chip. There are two
> regulators in this chip:
> 1. Safeout LDO with constant voltage output of 4.9V. It can be only
>    enabled or disabled.
> 2. Current regulator for the charger. It provides current from 90mA up
>    to 950mA.
> Driver supports Device Tree.
> 
> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
> Signed-off-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
> ---
>  drivers/regulator/Kconfig    |    7 ++
>  drivers/regulator/Makefile   |    1 +
>  drivers/regulator/max14577.c |  282 ++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 290 insertions(+)
>  create mode 100644 drivers/regulator/max14577.c
> 
> diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
> index ce785f4..11ee053 100644
> --- a/drivers/regulator/Kconfig
> +++ b/drivers/regulator/Kconfig
> @@ -249,6 +249,13 @@ config REGULATOR_LP8788
>  	help
>  	  This driver supports LP8788 voltage regulator chip.
>  
> +config REGULATOR_MAX14577
> +	tristate "Maxim 14577 regulator"
> +	depends on MFD_MAX14577
> +	help
> +	  This driver controls a Maxim 14577 regulator via I2C bus.
> +	  The regulators include safeout LDO and current regulator 'CHARGER'.
> +
>  config REGULATOR_MAX1586
>  	tristate "Maxim 1586/1587 voltage regulator"
>  	depends on I2C
> diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
> index 01c597e..654bd43 100644
> --- a/drivers/regulator/Makefile
> +++ b/drivers/regulator/Makefile
> @@ -35,6 +35,7 @@ obj-$(CONFIG_REGULATOR_LP872X) += lp872x.o
>  obj-$(CONFIG_REGULATOR_LP8788) += lp8788-buck.o
>  obj-$(CONFIG_REGULATOR_LP8788) += lp8788-ldo.o
>  obj-$(CONFIG_REGULATOR_LP8755) += lp8755.o
> +obj-$(CONFIG_REGULATOR_MAX14577) += max14577.o
>  obj-$(CONFIG_REGULATOR_MAX1586) += max1586.o
>  obj-$(CONFIG_REGULATOR_MAX8649)	+= max8649.o
>  obj-$(CONFIG_REGULATOR_MAX8660) += max8660.o
> diff --git a/drivers/regulator/max14577.c b/drivers/regulator/max14577.c
> new file mode 100644
> index 0000000..f449e57
> --- /dev/null
> +++ b/drivers/regulator/max14577.c
> @@ -0,0 +1,282 @@
> +/*
> + * max14577.c - Regulator driver for the Maxim 14577
> + *
> + * Copyright (C) 2013 Samsung Electronics
> + * Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/regulator/driver.h>
> +#include <linux/mfd/max14577.h>
> +#include <linux/mfd/max14577-private.h>
> +#include <linux/regulator/of_regulator.h>
> +
> +struct max14577_regulator {
> +	struct device *dev;
> +	struct max14577 *max14577;
> +	int num_regulators;
> +	struct regulator_dev **regulators;
> +};
> +
> +static int max14577_reg_is_enabled(struct regulator_dev *rdev)
> +{
> +	int rid = rdev_get_id(rdev);
> +	struct regmap *rmap = rdev->regmap;
> +	u8 reg_data;
> +
> +	switch (rid) {
> +	case MAX14577_CHARGER:
> +		max14577_read_reg(rmap, MAX14577_CHG_REG_CHG_CTRL2, &reg_data);
> +		if ((reg_data & CHGCTRL2_MBCHOSTEN_MASK) == 0)
> +			return 0;
> +		max14577_read_reg(rmap, MAX14577_CHG_REG_STATUS3, &reg_data);
> +		if ((reg_data & STATUS3_CGMBC_MASK) == 0)
> +			return 0;
> +		/* MBCHOSTEN and CGMBC are on */
> +		return 1;
> +	default:
> +		return -EINVAL;
> +	}
> +}
> +
> +static int max14577_reg_get_current_limit(struct regulator_dev *rdev)
> +{
> +	u8 reg_data;
> +	struct regmap *rmap = rdev->regmap;
> +
> +	if (rdev_get_id(rdev) != MAX14577_CHARGER)
> +		return -EINVAL;
> +
> +	max14577_read_reg(rmap, MAX14577_CHG_REG_CHG_CTRL4, &reg_data);
> +
> +	if ((reg_data & CHGCTRL4_MBCICHWRCL_MASK) == 0)
> +		return MAX14577_REGULATOR_CURRENT_LIMIT_MIN;
> +
> +	reg_data = ((reg_data & CHGCTRL4_MBCICHWRCH_MASK) >>
> +			CHGCTRL4_MBCICHWRCH_SHIFT);
> +	return MAX14577_REGULATOR_CURRENT_LIMIT_HIGH_START +
> +		reg_data * MAX14577_REGULATOR_CURRENT_LIMIT_HIGH_STEP;
> +}
> +
> +static int max14577_reg_set_current_limit(struct regulator_dev *rdev,
> +		int min_uA, int max_uA)
> +{
> +	int i, current_bits = 0xf;
> +	u8 reg_data;
> +
> +	if (rdev_get_id(rdev) != MAX14577_CHARGER)
> +		return -EINVAL;
> +
> +	if (min_uA > MAX14577_REGULATOR_CURRENT_LIMIT_MAX ||
> +			max_uA < MAX14577_REGULATOR_CURRENT_LIMIT_MIN)
> +		return -EINVAL;
> +
> +	if (max_uA < MAX14577_REGULATOR_CURRENT_LIMIT_HIGH_START) {
> +		/* Less than 200 mA, so set 90mA (turn only Low Bit off) */
> +		u8 reg_data = 0x0 << CHGCTRL4_MBCICHWRCL_SHIFT;
> +		return max14577_update_reg(rdev->regmap,
> +				MAX14577_CHG_REG_CHG_CTRL4,
> +				CHGCTRL4_MBCICHWRCL_MASK, reg_data);
> +	}
> +
> +	/* max_uA is in range: <LIMIT_HIGH_START, inifinite>, so search for
> +	 * valid current starting from LIMIT_MAX. */
> +	for (i = MAX14577_REGULATOR_CURRENT_LIMIT_MAX;
> +			i >= MAX14577_REGULATOR_CURRENT_LIMIT_HIGH_START;
> +			i -= MAX14577_REGULATOR_CURRENT_LIMIT_HIGH_STEP) {
> +		if (i <= max_uA)
> +			break;
> +		current_bits--;
> +	}
> +	BUG_ON(current_bits < 0); /* Cannot happen */
> +	/* Turn Low Bit on (use range 200mA-950 mA) */
> +	reg_data = 0x1 << CHGCTRL4_MBCICHWRCL_SHIFT;
> +	/* and set proper High Bits */
> +	reg_data |= current_bits << CHGCTRL4_MBCICHWRCH_SHIFT;
> +
> +	return max14577_update_reg(rdev->regmap, MAX14577_CHG_REG_CHG_CTRL4,
> +			CHGCTRL4_MBCICHWRCL_MASK | CHGCTRL4_MBCICHWRCH_MASK,
> +			reg_data);
> +}
> +
> +static struct regulator_ops max14577_safeout_ops = {
> +	.is_enabled		= regulator_is_enabled_regmap,
> +	.enable			= regulator_enable_regmap,
> +	.disable		= regulator_disable_regmap,
> +	.list_voltage		= regulator_list_voltage_linear,
> +};
> +
> +static struct regulator_ops max14577_charger_ops = {
> +	.is_enabled		= max14577_reg_is_enabled,
> +	.enable			= regulator_enable_regmap,
> +	.disable		= regulator_disable_regmap,
> +	.get_current_limit	= max14577_reg_get_current_limit,
> +	.set_current_limit	= max14577_reg_set_current_limit,
> +};
> +
> +static struct regulator_desc supported_regulators[] = {
> +	{
> +		.name = "SAFEOUT",
> +		.id = MAX14577_SAFEOUT,
> +		.ops = &max14577_safeout_ops,
> +		.type = REGULATOR_VOLTAGE,
> +		.owner = THIS_MODULE,
> +		.n_voltages = 1,
> +		.min_uV = MAX14577_REGULATOR_SAFEOUT_VOLTAGE,
> +		.enable_reg = MAX14577_REG_CONTROL2,
> +		.enable_mask = CTRL2_SFOUTORD_MASK,
> +	}, {
> +		.name = "CHARGER",
> +		.id = MAX14577_CHARGER,
> +		.ops = &max14577_charger_ops,
> +		.type = REGULATOR_CURRENT,
> +		.owner = THIS_MODULE,
> +		.enable_reg = MAX14577_CHG_REG_CHG_CTRL2,
> +		.enable_mask = CHGCTRL2_MBCHOSTEN_MASK,
> +	}
> +};
> +
> +#ifdef CONFIG_OF
> +static int max14577_regulator_dt_parse_pdata(struct platform_device *pdev,
> +					struct max14577_platform_data *pdata)
> +{
> +	struct max14577 *max14577 = dev_get_drvdata(pdev->dev.parent);
> +	struct device_node *np;
> +	struct max14577_regulator_platform_data *reg_pdata;
> +	struct of_regulator_match rmatch;
> +	int i, ret, cnt = 0;
> +
> +	np = of_get_child_by_name(max14577->dev->of_node, "regulators");
> +	if (!np)
> +		return -EINVAL;
> +
> +	reg_pdata = devm_kzalloc(&pdev->dev, sizeof(*reg_pdata) *
> +			     ARRAY_SIZE(supported_regulators), GFP_KERNEL);
> +	if (!reg_pdata)
> +		return -ENOMEM;
> +
> +	for (i = 0; i < ARRAY_SIZE(supported_regulators); i++) {
> +		rmatch.name = supported_regulators[i].name;
> +		ret = of_regulator_match(&pdev->dev, np, &rmatch, 1);
> +		if (ret != 1)
> +			continue;
> +		dev_dbg(&pdev->dev, "Found regulator %d/%s\n",
> +				supported_regulators[i].id,
> +				supported_regulators[i].name);
> +		reg_pdata[cnt].id = supported_regulators[i].id;
> +		reg_pdata[cnt].initdata = rmatch.init_data;
> +		reg_pdata[cnt].of_node = rmatch.of_node;
> +		cnt++;
> +	}
> +
> +	pdata->num_regulators = cnt;
> +	pdata->regulators = reg_pdata;
> +
> +	return 0;
> +}
> +#else
> +static int max14577_regulator_dt_parse_pdata(struct platform_device *pdev,
> +					struct max14577_platform_data *pdata)
> +{
> +	return 0;
> +}
> +#endif
> +
> +static int max14577_regulator_probe(struct platform_device *pdev)
> +{
> +	struct max14577_regulator *info;
> +	struct max14577 *max14577 = dev_get_drvdata(pdev->dev.parent);
> +	struct max14577_platform_data *pdata = dev_get_platdata(max14577->dev);
> +	int i, size;
> +	struct regulator_config config = {};
> +
> +	if (!pdata) {
> +		/* Parent must provide pdata */
> +		dev_err(&pdev->dev, "No MFD driver platform data found.\n");
> +		return -ENODEV;
> +	}
> +
> +	if (max14577->dev->of_node) {
> +		int ret = max14577_regulator_dt_parse_pdata(pdev, pdata);
> +		if (ret)
> +			return ret;
> +	}
> +
> +	info = devm_kzalloc(&pdev->dev, sizeof(struct max14577_regulator),
> +			GFP_KERNEL);
> +	if (!info)
> +		return -ENOMEM;
> +
> +	size = sizeof(struct regulator_dev *) * pdata->num_regulators;
> +	info->regulators = devm_kzalloc(&pdev->dev, size, GFP_KERNEL);
> +	if (!info->regulators) {
> +		dev_err(&pdev->dev, "Cannot allocate memory for regulators\n");
> +		return -ENOMEM;
> +	}
> +
> +	info->dev = &pdev->dev;
> +	info->max14577 = max14577;
> +	info->num_regulators = pdata->num_regulators;
> +
> +	config.dev = &pdev->dev;
> +	config.regmap = max14577->regmap;
> +	config.driver_data = info;
> +	platform_set_drvdata(pdev, info);

I don't see any code in this driver that reads from "info" so unless
I'm missing something obvious "info" is redundant and can be removed
altogether.

Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics

> +	for (i = 0; i < pdata->num_regulators; i++) {
> +		int id = pdata->regulators[i].id;
> +
> +		config.init_data = pdata->regulators[i].initdata;
> +		config.of_node = pdata->regulators[i].of_node;
> +
> +		info->regulators[i] = devm_regulator_register(&pdev->dev,
> +				&supported_regulators[id], &config);
> +		if (IS_ERR(info->regulators[i])) {
> +			int ret = PTR_ERR(info->regulators[i]);
> +			dev_err(&pdev->dev,
> +					"Regulator init failed for ID %d with error: %d\n",
> +					id, ret);
> +			return ret;
> +		}
> +	}
> +
> +	return 0;
> +}
> +
> +static struct platform_driver max14577_regulator_driver = {
> +	.driver = {
> +		   .owner = THIS_MODULE,
> +		   .name = "max14577-regulator",
> +		   },
> +	.probe	= max14577_regulator_probe,
> +};
> +
> +static int __init max14577_regulator_init(void)
> +{
> +	BUILD_BUG_ON(MAX14577_REGULATOR_CURRENT_LIMIT_HIGH_START +
> +			MAX14577_REGULATOR_CURRENT_LIMIT_HIGH_STEP * 0xf !=
> +			MAX14577_REGULATOR_CURRENT_LIMIT_MAX);
> +	return platform_driver_register(&max14577_regulator_driver);
> +}
> +subsys_initcall(max14577_regulator_init);
> +
> +static void __exit max14577_regulator_exit(void)
> +{
> +	platform_driver_unregister(&max14577_regulator_driver);
> +}
> +module_exit(max14577_regulator_exit);
> +
> +MODULE_AUTHOR("Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>");
> +MODULE_DESCRIPTION("MAXIM 14577 regulator driver");
> +MODULE_LICENSE("GPL");

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux