Commit 5c9cbade0629 ("ARM: dts: exynos: Fix DTC unit name warnings in Exynos5250") fixed all the DTC warnings about mismatchs between unit names and reg properties in Exynos5250 boards DTS. But unfortunately it also added a regression on the Exynos5250 Snow Chromebook when changing the port node names since the OF graph logic expects the port nodes to be always named 'port'. The Documentation/devicetree/bindings/graph.txt binding document says that when there is more than one port, '#address-cells', '#size-cells' and 'reg' properties should be used to number the port nodes. Fixes: 5c9cbade0629 ("ARM: dts: exynos: Fix DTC unit name warnings in Exynos5250") Reported-by: Marc Zyngier <marc.zyngier@xxxxxxx> Signed-off-by: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx> --- arch/arm/boot/dts/exynos5250-snow-common.dtsi | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/exynos5250-snow-common.dtsi b/arch/arm/boot/dts/exynos5250-snow-common.dtsi index 419d59da1751..fadbea744e1a 100644 --- a/arch/arm/boot/dts/exynos5250-snow-common.dtsi +++ b/arch/arm/boot/dts/exynos5250-snow-common.dtsi @@ -242,7 +242,7 @@ hpd-gpios = <&gpx0 7 GPIO_ACTIVE_HIGH>; ports { - port0 { + port { dp_out: endpoint { remote-endpoint = <&bridge_in>; }; @@ -485,13 +485,20 @@ edid-emulation = <5>; ports { - port0 { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + bridge_out: endpoint { remote-endpoint = <&panel_in>; }; }; - port1 { + port@1 { + reg = <1>; + bridge_in: endpoint { remote-endpoint = <&dp_out>; }; -- 2.5.5 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html