On Fri, Jun 03, 2016 at 02:57:33PM +0800, Jia Hongtao wrote: > For different types of SoC the sensor id and endianness may vary. > "#thermal-sensor-cells" is used to provide sensor id information. > "little-endian" property is to tell the endianness of TMU. > > Signed-off-by: Jia Hongtao <hongtao.jia@xxxxxxx> > --- > .../devicetree/bindings/thermal/qoriq-thermal.txt | 19 +++++++++++++------ > 1 file changed, 13 insertions(+), 6 deletions(-) > > diff --git a/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt b/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt > index 66223d5..8eeef80 100644 > --- a/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt > +++ b/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt > @@ -1,22 +1,28 @@ > * Thermal Monitoring Unit (TMU) on Freescale QorIQ SoCs > > Required properties: > -- compatible : Must include "fsl,qoriq-tmu". The version of the device is > +- compatible: Must include "fsl,qoriq-tmu". The version of the device is Please split functional changes from formatting changes. This one seems pretty pointless. > determined by the TMU IP Block Revision Register (IPBRR0) at > offset 0x0BF8. > - Table of correspondences between IPBRR0 values and example chips: > + Table of correspondences between IPBRR0 values and example chips: > Value Device > ---------- ----- > 0x01900102 T1040 > -- reg : Address range of TMU registers. > -- interrupts : Contains the interrupt for TMU. > -- fsl,tmu-range : The values to be programmed into TTRnCR, as specified by > +- reg: Address range of TMU registers. > +- interrupts: Contains the interrupt for TMU. > +- fsl,tmu-range: The values to be programmed into TTRnCR, as specified by > the SoC reference manual. The first cell is TTR0CR, the second is > TTR1CR, etc. > -- fsl,tmu-calibration : A list of cell pairs containing temperature > +- fsl,tmu-calibration: A list of cell pairs containing temperature > calibration data, as specified by the SoC reference manual. > The first cell of each pair is the value to be written to TTCFGR, > and the second is the value to be written to TSCFGR. > +- #thermal-sensor-cells: Must be 1. The sensor specifier is the monitoring > + site ID, and represents the "n" in TRITSRn and TRATSRn. > + > +Optional property: > +- little-endian: If present, the TMU registers are little endian. If absent, > + the default is big endian. > > Example: > > @@ -60,4 +66,5 @@ tmu@f0000 { > > 0x00030000 0x00000012 > 0x00030001 0x0000001d>; > + #thermal-sensor-cells = <1>; > }; > -- > 2.1.0.27.g96db324 > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@xxxxxxxxxxxxxxxxxxx > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html