Hi,
On 06-06-16 11:32, Chen-Yu Tsai wrote:
Hi,
On Sat, Jun 4, 2016 at 6:58 PM, Hans de Goede <hdegoede@xxxxxxxxxx> wrote:
It seems that recent kernels have a shorter timeout when scanning for
ethernet phys causing us to hit a timeout on boards where the phy's
regulator gets enabled just before scanning, which leads to non working
ethernet.
A 10ms startup delay seems to be enough to fix it, this commit adds a
20ms startup delay just to be safe.
I couldn't find any power sequencing information on the RTL8201CP,
which is what I assume these boards are using.
The RTL8211E does mention after power ramp up, there's a 20ms
delay before the core is ready.
If 20ms works for you, I've nothing against it though. Just putting the
information out there.
Some of them are using the icplus IP101A phy. As said 10 ms works in my
testing and I've bumped it to 20 to add some safety margin.
Regards,
Hans
This has been tested on a sun4i-a10-a1000 and sun5i-a10s-wobo-i5 board,
both of which have non-working ethernet on recent kernels without this
fix.
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
Changes in v2:
-Add Cc stable
---
arch/arm/boot/dts/sun4i-a10-a1000.dts | 1 +
arch/arm/boot/dts/sun4i-a10-hackberry.dts | 1 +
arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts | 1 +
arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts | 1 +
4 files changed, 4 insertions(+)
diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts
index c92a1ae..fa70b8f 100644
--- a/arch/arm/boot/dts/sun4i-a10-a1000.dts
+++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts
@@ -84,6 +84,7 @@
regulator-name = "emac-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
+ startup-delay-us = <20000>;
enable-active-high;
gpio = <&pio 7 15 GPIO_ACTIVE_HIGH>;
};
diff --git a/arch/arm/boot/dts/sun4i-a10-hackberry.dts b/arch/arm/boot/dts/sun4i-a10-hackberry.dts
index 2b17c51..6de83a6 100644
--- a/arch/arm/boot/dts/sun4i-a10-hackberry.dts
+++ b/arch/arm/boot/dts/sun4i-a10-hackberry.dts
@@ -66,6 +66,7 @@
regulator-name = "emac-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
+ startup-delay-us = <20000>;
enable-active-high;
gpio = <&pio 7 19 GPIO_ACTIVE_HIGH>;
};
diff --git a/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts b/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts
index 7afc7a6..e28f080 100644
--- a/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts
+++ b/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts
@@ -80,6 +80,7 @@
regulator-name = "emac-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
+ startup-delay-us = <20000>;
enable-active-high;
gpio = <&pio 7 19 GPIO_ACTIVE_HIGH>; /* PH19 */
};
diff --git a/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts b/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts
index 52d18ca..b5de75f 100644
--- a/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts
+++ b/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts
@@ -79,6 +79,7 @@
regulator-name = "emac-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
+ startup-delay-us = <20000>;
enable-active-high;
gpio = <&pio 0 2 GPIO_ACTIVE_HIGH>;
};
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
