On Mon, May 30, 2016 at 06:39:43PM +0200, Peter Senna Tschudin wrote: > Devicetree bindings documentation for the GE B850v3 LVDS/DP++ > display bridge. > > Signed-off-by: Peter Senna Tschudin <peter.senna@xxxxxxxxxxxxx> > --- > .../devicetree/bindings/ge/b850v3_lvds_dp.txt | 38 ++++++++++++++++++++++ > 1 file changed, 38 insertions(+) > create mode 100644 Documentation/devicetree/bindings/ge/b850v3_lvds_dp.txt > > diff --git a/Documentation/devicetree/bindings/ge/b850v3_lvds_dp.txt b/Documentation/devicetree/bindings/ge/b850v3_lvds_dp.txt > new file mode 100644 > index 0000000..32e123a > --- /dev/null > +++ b/Documentation/devicetree/bindings/ge/b850v3_lvds_dp.txt > @@ -0,0 +1,38 @@ > +Driver for GE B850v3 LVDS/DP++ display bridge > + > +Required properties: > + - compatible : should be "ge,b850v3_lvds_dp". > + - reg : should contain the address used to ack the interrupts. > + - interrupt-parent : should link to the gpio used as interrupt > + source on the host. > + - interrupts : one interrupt should be described here, as in > + <0 IRQ_TYPE_LEVEL_HIGH>. > + - edid-reg : should contain the address used to read edid information This should be known based on the bridge chip you are using. > + - port : should describe the vide signal connection between the host > + and the bridge. > + > +Example: > + > +&mux2_i2c2 { > + status = "okay"; > + clock-frequency = <100000>; > + > + b850v3_dp_bridge { Don't use '_' in node or property names or compatible strings. > + compatible = "ge,b850v3_lvds_dp"; > + #address-cells = <1>; > + #size-cells = <0>; > + > + reg = <0x73>; > + interrupt-parent = <&gpio2>; > + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; > + > + edid-reg = <0x72>; > + > + port@0 { > + reg = <0>; > + b850v3_dp_bridge_in: endpoint { > + remote-endpoint = <&lvds0_out>; > + }; > + }; > + }; > +}; > -- > 2.5.5 > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html