Now that Keystone PCIe controller supports error interrupt handling add interrupt property to PCI controller DT bindings to enable error interrupt handling. Signed-off-by: Murali Karicheri <m-karicheri2@xxxxxx> --- - v1 - no change from initial version - applies to master v4.7-rcx at kernel.org git repo arch/arm/boot/dts/keystone-k2e.dtsi | 2 ++ arch/arm/boot/dts/keystone.dtsi | 2 ++ 2 files changed, 4 insertions(+) diff --git a/arch/arm/boot/dts/keystone-k2e.dtsi b/arch/arm/boot/dts/keystone-k2e.dtsi index 5374c9a..9a51b8c 100644 --- a/arch/arm/boot/dts/keystone-k2e.dtsi +++ b/arch/arm/boot/dts/keystone-k2e.dtsi @@ -104,6 +104,8 @@ num-lanes = <2>; bus-range = <0x00 0xff>; + /* error interrupt */ + interrupts = <GIC_SPI 385 IRQ_TYPE_EDGE_RISING>; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 7>; interrupt-map = <0 0 0 1 &pcie_intc1 0>, /* INT A */ diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi index f627a1c..e23f46d 100644 --- a/arch/arm/boot/dts/keystone.dtsi +++ b/arch/arm/boot/dts/keystone.dtsi @@ -302,6 +302,8 @@ num-lanes = <2>; bus-range = <0x00 0xff>; + /* error interrupt */ + interrupts = <GIC_SPI 38 IRQ_TYPE_EDGE_RISING>; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 7>; interrupt-map = <0 0 0 1 &pcie_intc0 0>, /* INT A */ -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
